This is the latest recevied telemetry packets stored in our database for station/object DH1OME-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1786924941 | 1007.8 hPa | 30.9 C deg | 22.9 % | 1013.7 hPa | 0 C deg |
| 1786923122 | 1007.7 hPa | 30.9 C deg | 22.9 % | 1013.6 hPa | 0 C deg |
| 1786921307 | 1007.9 hPa | 30.9 C deg | 22.7 % | 1013.8 hPa | 0 C deg |
| 1786919492 | 1007.9 hPa | 30.9 C deg | 22.6 % | 1013.8 hPa | 0 C deg |
| 1786917679 | 1007.8 hPa | 30.9 C deg | 22.5 % | 1013.7 hPa | 0 C deg |
| 1786915862 | 1007.9 hPa | 30.9 C deg | 22.3 % | 1013.8 hPa | 0 C deg |
| 1786914047 | 1008 hPa | 31 C deg | 22.1 % | 1013.9 hPa | 0 C deg |
| 1786912232 | 1008.1 hPa | 30.9 C deg | 21.8 % | 1014 hPa | 0 C deg |
| 1786910415 | 1007.8 hPa | 30.9 C deg | 21.8 % | 1013.7 hPa | 0 C deg |
| 1786908604 | 1008 hPa | 30.8 C deg | 21.6 % | 1013.8 hPa | 0 C deg |
| 1786906785 | 1007.9 hPa | 30.8 C deg | 21.5 % | 1013.8 hPa | 0 C deg |
| 1786904970 | 1007.8 hPa | 30.7 C deg | 22.1 % | 1013.7 hPa | 0 C deg |
| 1786903155 | 1007.9 hPa | 30.7 C deg | 22.1 % | 1013.8 hPa | 0 C deg |
| 1786901345 | 1008 hPa | 30.7 C deg | 22 % | 1013.9 hPa | 0 C deg |
| 1786899524 | 1007.6 hPa | 30.6 C deg | 21.9 % | 1013.5 hPa | 0 C deg |
| 1786897709 | 1008.1 hPa | 30.7 C deg | 21.6 % | 1014 hPa | 0 C deg |
| 1786895894 | 1008.3 hPa | 30.7 C deg | 21.5 % | 1014.2 hPa | 0 C deg |
| 1786894079 | 1008.4 hPa | 30.6 C deg | 21.7 % | 1014.3 hPa | 0 C deg |
| 1786892264 | 1008.5 hPa | 30.6 C deg | 21.8 % | 1014.4 hPa | 0 C deg |
| 1786890449 | 1008.7 hPa | 30.5 C deg | 21.9 % | 1014.6 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)