APRS Track Direct

My position About ☰

reset

IZ1UQG-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ1UQG-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1732295048	12.98 Volt	100 Pkt	20 Pkt	43 Pcnt
1732294748	12.98 Volt	100 Pkt	20 Pkt	42 Pcnt
1732294448	12.98 Volt	100 Pkt	20 Pkt	42 Pcnt
1732294148	12.98 Volt	100 Pkt	20 Pkt	42 Pcnt
1732293848	13.05 Volt	100 Pkt	20 Pkt	43 Pcnt
1732293548	12.98 Volt	100 Pkt	30 Pkt	43 Pcnt
1732293248	12.98 Volt	100 Pkt	30 Pkt	44 Pcnt
1732292948	12.98 Volt	90 Pkt	30 Pkt	40 Pcnt
1732292648	12.98 Volt	80 Pkt	20 Pkt	38 Pcnt
1732292348	13.05 Volt	80 Pkt	30 Pkt	38 Pcnt
1732292048	12.98 Volt	70 Pkt	20 Pkt	36 Pcnt
1732291748	12.98 Volt	60 Pkt	20 Pkt	34 Pcnt
1732291448	12.98 Volt	60 Pkt	20 Pkt	33 Pcnt
1732291148	12.98 Volt	60 Pkt	20 Pkt	33 Pcnt
1732290848	12.98 Volt	60 Pkt	20 Pkt	32 Pcnt
1732290549	12.98 Volt	60 Pkt	20 Pkt	32 Pcnt
1732290248	12.98 Volt	60 Pkt	30 Pkt	33 Pcnt
1732289948	12.98 Volt	60 Pkt	30 Pkt	32 Pcnt
1732289649	13.05 Volt	70 Pkt	30 Pkt	34 Pcnt
1732289348	12.98 Volt	70 Pkt	40 Pkt	33 Pcnt
1732289049	12.98 Volt	70 Pkt	40 Pkt	36 Pcnt
1732288748	12.98 Volt	80 Pkt	50 Pkt	40 Pcnt
1732288448	12.98 Volt	80 Pkt	50 Pkt	41 Pcnt
1732288148	12.98 Volt	80 Pkt	50 Pkt	41 Pcnt
1732287849	13.05 Volt	90 Pkt	50 Pkt	41 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)