This is the latest recevied telemetry packets stored in our database for station/object SP2BYD-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786735312 | 41 Count | 792 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1786735012 | 40 Count | 781 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1786734712 | 39 Count | 760 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1786734412 | 38 Count | 747 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1786734113 | 37 Count | 709 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1786733812 | 36 Count | 695 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1786733513 | 35 Count | 685 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1786733214 | 34 Count | 663 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1786732914 | 33 Count | 651 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1786732614 | 32 Count | 646 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1786732313 | 31 Count | 632 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1786731714 | 29 Count | 601 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1786731414 | 28 Count | 588 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1786731115 | 27 Count | 587 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1786730814 | 26 Count | 578 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1786730515 | 25 Count | 555 Count | 0 Count | 4.18 VDC | 0.1 VDC |
| 1786730214 | 24 Count | 543 Count | 0 Count | 4.18 VDC | 0.58 VDC |
| 1786729915 | 23 Count | 525 Count | 0 Count | 4.19 VDC | 2.16 VDC |
| 1786729615 | 22 Count | 497 Count | 0 Count | 4.19 VDC | 4.04 VDC |
| 1786729316 | 21 Count | 479 Count | 0 Count | 4.19 VDC | 4.64 VDC |
| 1786729015 | 20 Count | 466 Count | 0 Count | 4.19 VDC | 5.14 VDC |
| 1786728715 | 19 Count | 437 Count | 0 Count | 4.19 VDC | 5.36 VDC |
| 1786728416 | 18 Count | 414 Count | 0 Count | 4.19 VDC | 5.56 VDC |
| 1786728116 | 17 Count | 395 Count | 0 Count | 4.19 VDC | 5.72 VDC |
| 1786727815 | 16 Count | 368 Count | 0 Count | 4.19 VDC | 5.84 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)