This is the latest recevied telemetry packets stored in our database for station/object 9W8NIC-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1782656682 | 4.12 VDC | 2.34 VDC | 0 | 0 | 0 |
| 1782655782 | 4.14 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1782654882 | 4.15 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1782653982 | 4.15 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1782653081 | 4.15 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1782652181 | 4.16 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1782651281 | 4.16 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1782650380 | 4.17 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1782649480 | 4.18 VDC | 2.38 VDC | 0 | 0 | 0 |
| 1782648580 | 4.18 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1782647680 | 4.18 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1782646779 | 4.19 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1782645879 | 4.2 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1782644979 | 4.21 VDC | 2.38 VDC | 0 | 0 | 0 |
| 1782644078 | 4.23 VDC | 2.74 VDC | 0 | 0 | 0 |
| 1782643178 | 4.24 VDC | 4.02 VDC | 0 | 0 | 0 |
| 1782642278 | 4.26 VDC | 4.16 VDC | 0 | 0 | 0 |
| 1782641378 | 4.27 VDC | 6.2 VDC | 0 | 0 | 0 |
| 1782640477 | 4.27 VDC | 6.56 VDC | 0 | 0 | 0 |
| 1782639577 | 4.28 VDC | 6.62 VDC | 0 | 0 | 0 |
| 1782638677 | 4.27 VDC | 6.84 VDC | 0 | 0 | 0 |
| 1782637776 | 4.27 VDC | 7 VDC | 0 | 0 | 0 |
| 1782636876 | 4.28 VDC | 6.94 VDC | 0 | 0 | 0 |
| 1782635976 | 4.28 VDC | 6.94 VDC | 0 | 0 | 0 |
| 1782635076 | 4.27 VDC | 6.88 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)