APRS Track Direct

My position About ☰

reset

ED6YAE-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ED6YAE-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	DC*	RxP-1h*	Dg1h*	Eff1h*
1732292306	11.48 Volt	180 Pkt	130 Pkt	67 *100
1732292006	11.25 Volt	170 Pkt	120 Pkt	64 *100
1732291706	11.25 Volt	160 Pkt	120 Pkt	65 *100
1732291406	11.4 Volt	150 Pkt	110 Pkt	65 *100
1732291106	11.4 Volt	150 Pkt	100 Pkt	65 *100
1732290806	11.25 Volt	150 Pkt	110 Pkt	65 *100
1732290506	11.33 Volt	140 Pkt	110 Pkt	66 *100
1732290206	11.25 Volt	140 Pkt	110 Pkt	63 *100
1732289906	11.25 Volt	140 Pkt	110 Pkt	64 *100
1732289606	11.33 Volt	140 Pkt	100 Pkt	64 *100
1732289306	11.4 Volt	140 Pkt	110 Pkt	64 *100
1732289006	11.4 Volt	150 Pkt	120 Pkt	64 *100
1732288706	11.55 Volt	150 Pkt	110 Pkt	63 *100
1732288406	11.48 Volt	150 Pkt	110 Pkt	61 *100
1732288106	11.4 Volt	150 Pkt	110 Pkt	59 *100
1732287806	11.48 Volt	150 Pkt	120 Pkt	58 *100
1732287506	11.33 Volt	150 Pkt	120 Pkt	57 *100
1732287206	11.4 Volt	150 Pkt	110 Pkt	57 *100
1732286906	11.4 Volt	150 Pkt	110 Pkt	56 *100
1732286606	11.55 Volt	160 Pkt	120 Pkt	58 *100
1732286306	11.4 Volt	160 Pkt	130 Pkt	56 *100
1732286006	11.48 Volt	160 Pkt	120 Pkt	56 *100
1732285706	11.33 Volt	160 Pkt	120 Pkt	56 *100
1732285406	11.48 Volt	150 Pkt	120 Pkt	55 *100
1732285106	11.48 Volt	140 Pkt	110 Pkt	54 *100

*Used Equation Coefficients:

DC: 0, 0.075, 0

RxP-1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

DC-1: 0, 0.075, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)