APRS Track Direct

My position About ☰

reset

IQ3MF-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IQ3MF-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff*
1790661247	156 Pkt	1050 Pkt	0 Pkt	0.7 Pcnt	71 Pcnt
1790660947	154 Pkt	1040 Pkt	1 Pkt	0.7 Pcnt	71 Pcnt
1790660647	159 Pkt	1030 Pkt	0 Pkt	0.7 Pcnt	71 Pcnt
1790660347	160 Pkt	1030 Pkt	1 Pkt	0.7 Pcnt	71 Pcnt
1790660047	163 Pkt	1010 Pkt	0 Pkt	0.7 Pcnt	71 Pcnt
1790659747	174 Pkt	1010 Pkt	1 Pkt	0.7 Pcnt	71 Pcnt
1790659447	152 Pkt	980 Pkt	0 Pkt	0.7 Pcnt	71 Pcnt
1790659147	164 Pkt	950 Pkt	1 Pkt	0.7 Pcnt	71 Pcnt
1790658847	176 Pkt	940 Pkt	0 Pkt	0.7 Pcnt	71 Pcnt
1790658547	150 Pkt	940 Pkt	1 Pkt	0.7 Pcnt	71 Pcnt
1790658247	146 Pkt	950 Pkt	0 Pkt	0.7 Pcnt	71 Pcnt
1790657947	144 Pkt	940 Pkt	1 Pkt	0.7 Pcnt	71 Pcnt
1790657647	146 Pkt	940 Pkt	0 Pkt	0.7 Pcnt	71 Pcnt
1790657347	146 Pkt	950 Pkt	1 Pkt	0.7 Pcnt	71 Pcnt
1790657047	145 Pkt	960 Pkt	0 Pkt	0.7 Pcnt	71 Pcnt
1790656747	136 Pkt	950 Pkt	1 Pkt	0.7 Pcnt	71 Pcnt
1790656447	122 Pkt	970 Pkt	0 Pkt	0.7 Pcnt	71 Pcnt
1790656147	122 Pkt	1000 Pkt	1 Pkt	0.7 Pcnt	71 Pcnt
1790655847	120 Pkt	1060 Pkt	0 Pkt	0.7 Pcnt	71 Pcnt
1790655547	149 Pkt	1110 Pkt	1 Pkt	0.7 Pcnt	71 Pcnt
1790655247	180 Pkt	1150 Pkt	0 Pkt	0.7 Pcnt	71 Pcnt
1790654948	150 Pkt	1170 Pkt	1 Pkt	0.7 Pcnt	71 Pcnt
1790654647	139 Pkt	1200 Pkt	0 Pkt	0.7 Pcnt	71 Pcnt
1790654347	161 Pkt	1250 Pkt	1 Pkt	0.7 Pcnt	71 Pcnt
1790654047	157 Pkt	1260 Pkt	0 Pkt	0.7 Pcnt	71 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)