APRS Track Direct

My position About ☰

reset

SR4LIN Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR4LIN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff*
1749315751	12.72 Volt	330 Pkt	20 Pkt	62 Pcnt	70 Pcnt
1749313051	12.72 Volt	280 Pkt	0 Pkt	63 Pcnt	70 Pcnt
1749310351	12.72 Volt	260 Pkt	0 Pkt	66 Pcnt	70 Pcnt
1749307651	12.72 Volt	260 Pkt	0 Pkt	59 Pcnt	70 Pcnt
1749304951	12.72 Volt	270 Pkt	0 Pkt	62 Pcnt	70 Pcnt
1749302251	12.72 Volt	220 Pkt	0 Pkt	63 Pcnt	70 Pcnt
1749299551	12.72 Volt	230 Pkt	0 Pkt	59 Pcnt	70 Pcnt
1749296851	12.72 Volt	320 Pkt	0 Pkt	61 Pcnt	70 Pcnt
1749294151	12.72 Volt	430 Pkt	10 Pkt	66 Pcnt	70 Pcnt
1749291452	12.72 Volt	340 Pkt	10 Pkt	61 Pcnt	70 Pcnt
1749288752	12.72 Volt	220 Pkt	0 Pkt	57 Pcnt	70 Pcnt
1749286052	12.72 Volt	250 Pkt	0 Pkt	58 Pcnt	70 Pcnt
1749283352	12.72 Volt	240 Pkt	0 Pkt	58 Pcnt	70 Pcnt
1749280652	12.72 Volt	260 Pkt	0 Pkt	64 Pcnt	70 Pcnt
1749277952	12.72 Volt	360 Pkt	20 Pkt	64 Pcnt	70 Pcnt
1749275252	12.72 Volt	540 Pkt	30 Pkt	67 Pcnt	70 Pcnt
1749272552	12.72 Volt	560 Pkt	20 Pkt	68 Pcnt	70 Pcnt
1749269852	12.72 Volt	520 Pkt	10 Pkt	64 Pcnt	70 Pcnt
1749267152	12.72 Volt	410 Pkt	10 Pkt	60 Pcnt	70 Pcnt
1749264452	12.72 Volt	390 Pkt	0 Pkt	65 Pcnt	70 Pcnt
1749261753	12.72 Volt	390 Pkt	0 Pkt	58 Pcnt	70 Pcnt
1749259053	12.72 Volt	390 Pkt	0 Pkt	63 Pcnt	70 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)