APRS Track Direct

My position About ☰

reset

YM5KST-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM5KST-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1732547695	19 Pkt	1 Pkt	0 Pkt	-67 dBm	11.73 V
1732546965	13 Pkt	0 Pkt	0 Pkt	-67 dBm	11.75 V
1732546235	6 Pkt	1 Pkt	0 Pkt	-67 dBm	11.77 V
1732545505	9 Pkt	1 Pkt	0 Pkt	-68 dBm	11.77 V
1732544775	2 Pkt	0 Pkt	0 Pkt	-69 dBm	11.81 V
1732544045	5 Pkt	0 Pkt	1 Pkt	-67 dBm	11.81 V
1732543315	8 Pkt	2 Pkt	1 Pkt	-68 dBm	11.77 V
1732542585	6 Pkt	0 Pkt	3 Pkt	-68 dBm	11.73 V
1732541855	5 Pkt	1 Pkt	7 Pkt	-68 dBm	11.69 V
1732541125	6 Pkt	0 Pkt	2 Pkt	-68 dBm	11.71 V
1732540395	2 Pkt	2 Pkt	0 Pkt	-69 dBm	11.73 V
1732539665	7 Pkt	0 Pkt	0 Pkt	-68 dBm	11.71 V
1732538935	2 Pkt	0 Pkt	0 Pkt	-67 dBm	11.71 V
1732538205	5 Pkt	0 Pkt	2 Pkt	-68 dBm	11.65 V
1732537475	7 Pkt	2 Pkt	0 Pkt	-68 dBm	11.63 V
1732536745	6 Pkt	1 Pkt	0 Pkt	-69 dBm	11.59 V
1732536015	18 Pkt	0 Pkt	0 Pkt	-68 dBm	11.57 V
1732535285	10 Pkt	2 Pkt	0 Pkt	-70 dBm	11.57 V
1732534555	3 Pkt	0 Pkt	0 Pkt	-69 dBm	11.59 V
1732533825	5 Pkt	1 Pkt	0 Pkt	-68 dBm	11.57 V
1732533094	4 Pkt	1 Pkt	0 Pkt	-69 dBm	11.53 V
1732532365	4 Pkt	1 Pkt	0 Pkt	-68 dBm	11.5 V
1732531635	2 Pkt	0 Pkt	0 Pkt	-69 dBm	11.57 V
1732530904	3 Pkt	2 Pkt	0 Pkt	-68 dBm	11.59 V
1732530174	4 Pkt	0 Pkt	0 Pkt	-66 dBm	11.53 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)