This is the latest recevied telemetry packets stored in our database for station/object ER-IR5K. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1782488822 | 165 | 309 | 5 | 13 | 0 |
| 1782488222 | 17 | 108 | 1 | 10 | 0 |
| 1782487622 | 291 | 667 | 6 | 9 | 0 |
| 1782487022 | 14 | 92 | 1 | 6 | 0 |
| 1782486422 | 0 | 110 | 0 | 2 | 0 |
| 1782485822 | 76 | 202 | 5 | 13 | 0 |
| 1782485222 | 130 | 337 | 5 | 13 | 0 |
| 1782484622 | 9 | 62 | 1 | 5 | 0 |
| 1782484022 | 16 | 87 | 2 | 9 | 0 |
| 1782483422 | 28 | 145 | 2 | 8 | 0 |
| 1782482822 | 0 | 38 | 0 | 3 | 0 |
| 1782482222 | 0 | 87 | 0 | 10 | 0 |
| 1782481622 | 41 | 282 | 4 | 25 | 0 |
| 1782481022 | 109 | 633 | 6 | 30 | 0 |
| 1782480422 | 0 | 29 | 0 | 2 | 0 |
| 1782479822 | 0 | 191 | 0 | 13 | 0 |
| 1782479222 | 0 | 37 | 0 | 3 | 0 |
| 1782478622 | 0 | 68 | 0 | 7 | 0 |
| 1782478022 | 0 | 76 | 0 | 7 | 0 |
| 1782477422 | 252 | 498 | 6 | 18 | 0 |
| 1782476822 | 407 | 647 | 11 | 13 | 0 |
| 1782476222 | 42 | 186 | 4 | 15 | 0 |
| 1782475622 | 13 | 66 | 1 | 4 | 0 |
| 1782475022 | 0 | 29 | 0 | 2 | 0 |
| 1782474422 | 15 | 89 | 2 | 10 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)