APRS Track Direct

My position About ☰

reset

IU4DKT-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IU4DKT-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	DgR*	Eff1h*
1732379008	76 Pkt	550 Pkt	0.48 Pcnt	64 Pcnt
1732378708	60 Pkt	560 Pkt	0.48 Pcnt	64 Pcnt
1732378408	80 Pkt	560 Pkt	0.48 Pcnt	64 Pcnt
1732378108	91 Pkt	580 Pkt	0.48 Pcnt	65 Pcnt
1732377808	59 Pkt	550 Pkt	0.48 Pcnt	65 Pcnt
1732377508	69 Pkt	550 Pkt	0.48 Pcnt	64 Pcnt
1732377208	102 Pkt	560 Pkt	0.48 Pcnt	65 Pcnt
1732376908	96 Pkt	550 Pkt	0.48 Pcnt	64 Pcnt
1732376608	99 Pkt	530 Pkt	0.48 Pcnt	64 Pcnt
1732376309	104 Pkt	510 Pkt	0.48 Pcnt	62 Pcnt
1732376008	108 Pkt	510 Pkt	0.48 Pcnt	61 Pcnt
1732375708	92 Pkt	500 Pkt	0.48 Pcnt	60 Pcnt
1732375408	76 Pkt	490 Pkt	0.48 Pcnt	60 Pcnt
1732375108	86 Pkt	490 Pkt	0.48 Pcnt	60 Pcnt
1732374808	66 Pkt	470 Pkt	0.48 Pcnt	58 Pcnt
1732374508	63 Pkt	480 Pkt	0.48 Pcnt	58 Pcnt
1732374209	72 Pkt	500 Pkt	0.48 Pcnt	58 Pcnt
1732373908	72 Pkt	500 Pkt	0.48 Pcnt	58 Pcnt
1732373608	65 Pkt	500 Pkt	0.48 Pcnt	58 Pcnt
1732373308	64 Pkt	510 Pkt	0.48 Pcnt	59 Pcnt
1732373008	77 Pkt	510 Pkt	0.48 Pcnt	59 Pcnt
1732372709	87 Pkt	510 Pkt	0.48 Pcnt	59 Pcnt
1732372409	93 Pkt	510 Pkt	0.48 Pcnt	59 Pcnt
1732372109	72 Pkt	500 Pkt	0.49 Pcnt	58 Pcnt
1732371809	66 Pkt	520 Pkt	0.49 Pcnt	57 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)