This is the latest recevied telemetry packets stored in our database for station/object EL-IR5F. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274290 | 0 | 35 | 0 | 2 | 0 |
| 1836274140 | 0 | 19 | 0 | 1 | 0 |
| 1766185714 | 0 | 175 | 0 | 14 | 0 |
| 1766185114 | 0 | 19 | 0 | 1 | 0 |
| 1766184514 | 0 | 35 | 0 | 2 | 0 |
| 1766183913 | 6 | 51 | 4 | 5 | 0 |
| 1766183313 | 3 | 76 | 4 | 8 | 0 |
| 1766182713 | 7 | 87 | 7 | 10 | 0 |
| 1766182114 | 501 | 549 | 9 | 9 | 0 |
| 1766181513 | 670 | 785 | 16 | 16 | 0 |
| 1766180914 | 0 | 30 | 1 | 3 | 0 |
| 1766180314 | 2 | 45 | 4 | 7 | 0 |
| 1766179714 | 14 | 72 | 3 | 6 | 0 |
| 1766179113 | 11 | 57 | 3 | 6 | 0 |
| 1766178514 | 8 | 56 | 1 | 4 | 0 |
| 1766177914 | 0 | 40 | 1 | 3 | 0 |
| 1766177314 | 14 | 82 | 10 | 12 | 0 |
| 1766176714 | 0 | 44 | 0 | 4 | 0 |
| 1766176114 | 0 | 32 | 0 | 3 | 0 |
| 1766175514 | 33 | 62 | 3 | 6 | 0 |
| 1766174914 | 173 | 947 | 6 | 14 | 0 |
| 1766174314 | 209 | 916 | 9 | 25 | 0 |
| 1766173713 | 470 | 915 | 9 | 16 | 0 |
| 1766173114 | 323 | 940 | 5 | 10 | 0 |
| 1766172514 | 400 | 972 | 7 | 9 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)