This is the latest recevied telemetry packets stored in our database for station/object N1FLY-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RFIn* | RFiGate* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791750041 | 63 Pkts | 63 Pkts | 0 | 0 | 0 |
| 1791748241 | 93 Pkts | 93 Pkts | 0 | 0 | 0 |
| 1791746442 | 100 Pkts | 100 Pkts | 0 | 0 | 0 |
| 1791744650 | 89 Pkts | 89 Pkts | 0 | 0 | 0 |
| 1791742842 | 79 Pkts | 79 Pkts | 0 | 0 | 0 |
| 1791741042 | 115 Pkts | 113 Pkts | 0 | 0 | 0 |
| 1791739242 | 87 Pkts | 87 Pkts | 0 | 0 | 0 |
| 1791737442 | 71 Pkts | 67 Pkts | 0 | 0 | 0 |
| 1791735429 | 109 Pkts | 109 Pkts | 0 | 0 | 0 |
| 1791733629 | 130 Pkts | 125 Pkts | 0 | 0 | 0 |
| 1791731829 | 168 Pkts | 165 Pkts | 0 | 0 | 0 |
| 1791730029 | 186 Pkts | 182 Pkts | 0 | 0 | 0 |
| 1791728229 | 158 Pkts | 153 Pkts | 0 | 0 | 0 |
| 1791726429 | 211 Pkts | 210 Pkts | 0 | 0 | 0 |
| 1791724629 | 198 Pkts | 197 Pkts | 0 | 0 | 0 |
| 1791722829 | 132 Pkts | 129 Pkts | 0 | 0 | 0 |
| 1791721029 | 93 Pkts | 86 Pkts | 0 | 0 | 0 |
| 1791719229 | 105 Pkts | 99 Pkts | 0 | 0 | 0 |
| 1791717429 | 85 Pkts | 79 Pkts | 0 | 0 | 0 |
| 1791715629 | 83 Pkts | 74 Pkts | 0 | 0 | 0 |
| 1791713829 | 78 Pkts | 77 Pkts | 0 | 0 | 0 |
| 1791712029 | 73 Pkts | 68 Pkts | 0 | 0 | 0 |
| 1791710229 | 75 Pkts | 72 Pkts | 0 | 0 | 0 |
| 1791708429 | 72 Pkts | 69 Pkts | 0 | 0 | 0 |
| 1791706629 | 79 Pkts | 75 Pkts | 0 | 0 | 0 |
*Used Equation Coefficients:
RFIn: 0, 1, 0
RFiGate: 0, 1, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)