This is the latest recevied telemetry packets stored in our database for station/object SA7NOA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786728298 | 0 Count | 916 Count | 0 Count | 0 VDC | 0 VDC |
| 1786727397 | 0 Count | 913 Count | 0 Count | 0 VDC | 0 VDC |
| 1786726497 | 0 Count | 909 Count | 0 Count | 0 VDC | 0 VDC |
| 1786725604 | 0 Count | 905 Count | 0 Count | 0 VDC | 0 VDC |
| 1786724704 | 0 Count | 902 Count | 0 Count | 0 VDC | 0 VDC |
| 1786723804 | 0 Count | 899 Count | 0 Count | 0 VDC | 0 VDC |
| 1786722904 | 0 Count | 897 Count | 0 Count | 0 VDC | 0 VDC |
| 1786722004 | 0 Count | 894 Count | 0 Count | 0 VDC | 0 VDC |
| 1786721104 | 0 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1786720204 | 0 Count | 889 Count | 0 Count | 0 VDC | 0 VDC |
| 1786719304 | 0 Count | 886 Count | 0 Count | 0 VDC | 0 VDC |
| 1786718403 | 0 Count | 883 Count | 0 Count | 0 VDC | 0 VDC |
| 1786717503 | 0 Count | 880 Count | 0 Count | 0 VDC | 0 VDC |
| 1786716603 | 0 Count | 877 Count | 0 Count | 0 VDC | 0 VDC |
| 1786715703 | 0 Count | 874 Count | 0 Count | 0 VDC | 0 VDC |
| 1786714803 | 0 Count | 866 Count | 0 Count | 0 VDC | 0 VDC |
| 1786713903 | 0 Count | 863 Count | 0 Count | 0 VDC | 0 VDC |
| 1786713003 | 0 Count | 860 Count | 0 Count | 0 VDC | 0 VDC |
| 1786712103 | 0 Count | 857 Count | 0 Count | 0 VDC | 0 VDC |
| 1786711203 | 0 Count | 854 Count | 0 Count | 0 VDC | 0 VDC |
| 1786710303 | 0 Count | 851 Count | 0 Count | 0 VDC | 0 VDC |
| 1786709403 | 0 Count | 848 Count | 0 Count | 0 VDC | 0 VDC |
| 1786708503 | 0 Count | 845 Count | 0 Count | 0 VDC | 0 VDC |
| 1786707602 | 0 Count | 842 Count | 0 Count | 0 VDC | 0 VDC |
| 1786706702 | 0 Count | 839 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)