This is the latest recevied telemetry packets stored in our database for station/object ER-IR0ZZN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758193418 | 4 | 46 | 3 | 7 | 0 |
| 1758192818 | 19 | 95 | 6 | 10 | 0 |
| 1758192218 | 78 | 200 | 21 | 26 | 0 |
| 1758191618 | 0 | 50 | 0 | 7 | 0 |
| 1758191018 | 5 | 55 | 2 | 5 | 0 |
| 1758190418 | 21 | 344 | 3 | 17 | 0 |
| 1758189818 | 22 | 512 | 6 | 25 | 0 |
| 1758189218 | 0 | 135 | 0 | 17 | 0 |
| 1758188618 | 0 | 65 | 0 | 9 | 0 |
| 1758188018 | 0 | 166 | 0 | 20 | 0 |
| 1758187418 | 0 | 172 | 0 | 9 | 0 |
| 1758186818 | 40 | 189 | 5 | 22 | 0 |
| 1758186218 | 6 | 605 | 1 | 25 | 0 |
| 1758185618 | 0 | 376 | 0 | 12 | 0 |
| 1758185018 | 12 | 84 | 5 | 11 | 0 |
| 1758184418 | 0 | 382 | 0 | 10 | 0 |
| 1758183818 | 0 | 937 | 0 | 10 | 0 |
| 1758183218 | 0 | 138 | 0 | 15 | 0 |
| 1758182618 | 0 | 119 | 0 | 13 | 0 |
| 1758181418 | 0 | 35 | 0 | 2 | 0 |
| 1758180818 | 0 | 35 | 0 | 5 | 0 |
| 1758180218 | 0 | 53 | 0 | 8 | 0 |
| 1758179618 | 0 | 35 | 0 | 2 | 0 |
| 1758179018 | 0 | 16 | 0 | 1 | 0 |
| 1758178418 | 0 | 47 | 0 | 4 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)