This is the latest recevied telemetry packets stored in our database for station/object CE1RLP-30. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274479 | 4.5 VDC | 12.76 VDC | 0 | 0 | 0 |
| 1762332257 | 4.53 VDC | 12.56 VDC | 0 | 0 | 0 |
| 1762331356 | 4.49 VDC | 12.54 VDC | 0 | 0 | 0 |
| 1762330455 | 4.55 VDC | 12.64 VDC | 0 | 0 | 0 |
| 1762329554 | 4.53 VDC | 12.54 VDC | 0 | 0 | 0 |
| 1762328654 | 4.55 VDC | 12.64 VDC | 0 | 0 | 0 |
| 1762327753 | 4.56 VDC | 12.64 VDC | 0 | 0 | 0 |
| 1762326852 | 4.51 VDC | 12.58 VDC | 0 | 0 | 0 |
| 1762325952 | 4.54 VDC | 12.6 VDC | 0 | 0 | 0 |
| 1762325051 | 4.49 VDC | 12.58 VDC | 0 | 0 | 0 |
| 1762324150 | 4.56 VDC | 12.62 VDC | 0 | 0 | 0 |
| 1762323249 | 4.47 VDC | 12.6 VDC | 0 | 0 | 0 |
| 1762322349 | 4.53 VDC | 12.6 VDC | 0 | 0 | 0 |
| 1762321448 | 4.49 VDC | 12.62 VDC | 0 | 0 | 0 |
| 1762320547 | 4.5 VDC | 12.54 VDC | 0 | 0 | 0 |
| 1762319876 | 4.53 VDC | 12.78 VDC | 0 | 0 | 0 |
| 1762319876 | 4.51 VDC | 12.7 VDC | 0 | 0 | 0 |
| 1762319647 | 4.53 VDC | 12.78 VDC | 0 | 0 | 0 |
| 1762317829 | 4.51 VDC | 12.76 VDC | 0 | 0 | 0 |
| 1762316962 | 4.56 VDC | 12.64 VDC | 0 | 0 | 0 |
| 1762316061 | 4.47 VDC | 12.58 VDC | 0 | 0 | 0 |
| 1762315160 | 4.49 VDC | 12.6 VDC | 0 | 0 | 0 |
| 1762314266 | 4.53 VDC | 12.68 VDC | 0 | 0 | 0 |
| 1762313369 | 4.57 VDC | 12.54 VDC | 0 | 0 | 0 |
| 1762312472 | 4.52 VDC | 12.96 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)