APRS Track Direct

My position About ☰

reset

VE3GUK-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE3GUK-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1732289845	13.8 Volt	20 Pkt	10 Pkt	100 Pcnt	21 C
1732289245	13.8 Volt	20 Pkt	20 Pkt	100 Pcnt	21.5 C
1732288645	13.8 Volt	20 Pkt	10 Pkt	100 Pcnt	21.5 C
1732288045	13.8 Volt	20 Pkt	10 Pkt	100 Pcnt	22 C
1732287445	13.8 Volt	20 Pkt	20 Pkt	100 Pcnt	22.5 C
1732286845	13.8 Volt	20 Pkt	20 Pkt	100 Pcnt	22 C
1732286245	13.8 Volt	20 Pkt	10 Pkt	100 Pcnt	21 C
1732285645	13.8 Volt	20 Pkt	20 Pkt	100 Pcnt	21.5 C
1732285045	13.8 Volt	20 Pkt	20 Pkt	96 Pcnt	21.5 C
1732284445	13.8 Volt	30 Pkt	10 Pkt	88 Pcnt	22.5 C
1732283845	13.8 Volt	40 Pkt	10 Pkt	86 Pcnt	22 C
1732283245	13.8 Volt	50 Pkt	20 Pkt	83 Pcnt	21 C
1732282645	13.8 Volt	60 Pkt	10 Pkt	83 Pcnt	21.5 C
1732282045	13.8 Volt	60 Pkt	10 Pkt	83 Pcnt	22.5 C
1732281445	13.8 Volt	60 Pkt	10 Pkt	81 Pcnt	21.5 C
1732280845	13.8 Volt	50 Pkt	10 Pkt	86 Pcnt	21 C
1732280245	13.8 Volt	40 Pkt	0 Pkt	85 Pcnt	21 C
1732279645	13.8 Volt	30 Pkt	0 Pkt	87 Pcnt	21.5 C
1732279045	13.73 Volt	20 Pkt	0 Pkt	88 Pcnt	22 C
1732278445	13.8 Volt	10 Pkt	0 Pkt	88 Pcnt	21.5 C
1732277845	13.88 Volt	0 Pkt	0 Pkt	100 Pcnt	21 C
1732277245	13.8 Volt	0 Pkt	0 Pkt	100 Pcnt	21 C
1732276645	13.8 Volt	0 Pkt	0 Pkt	100 Pcnt	21 C
1732276045	13.8 Volt	0 Pkt	0 Pkt	100 Pcnt	21.5 C
1732275445	13.8 Volt	0 Pkt	0 Pkt	100 Pcnt	21.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)