APRS Track Direct

My position About ☰

reset

OE1TKS-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE1TKS-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	70+50Ah*	70+50Ah*	80Ah*	80Ah*	Netz*
1745054217	14.63 Volt	1 Ampere	13.7 Volt	6.6 Ampere	50.01 50 Hz
1745053857	14.7 Volt	1.2 Ampere	13.7 Volt	7.2 Ampere	50 50 Hz
1745053497	14.7 Volt	0.4 Ampere	13.7 Volt	6.8 Ampere	50 50 Hz
1745053137	14.55 Volt	0.8 Ampere	13.7 Volt	6.2 Ampere	50.01 50 Hz
1745052777	14.63 Volt	0.6 Ampere	13.7 Volt	6.6 Ampere	50.01 50 Hz
1745052417	14.63 Volt	1 Ampere	13.7 Volt	6.8 Ampere	49.99 50 Hz
1745052057	14.55 Volt	1.2 Ampere	13.6 Volt	6.4 Ampere	50.01 50 Hz
1745051697	14.4 Volt	0.6 Ampere	13.6 Volt	5 Ampere	50 50 Hz
1745051337	14.48 Volt	1.8 Ampere	13.6 Volt	5.8 Ampere	50.05 50 Hz
1745050977	14.4 Volt	2.6 Ampere	13.6 Volt	5.4 Ampere	50.02 50 Hz
1745050617	14.25 Volt	4 Ampere	13.6 Volt	5 Ampere	50 50 Hz
1745050257	14.1 Volt	5.2 Ampere	13.5 Volt	4.2 Ampere	50.02 50 Hz
1745049897	13.95 Volt	6.4 Ampere	13.4 Volt	3 Ampere	49.98 50 Hz
1745049537	13.88 Volt	8.6 Ampere	13.4 Volt	3.4 Ampere	49.98 50 Hz
1745049177	13.8 Volt	9.8 Ampere	13.4 Volt	3.4 Ampere	50 50 Hz
1745048817	13.65 Volt	9 Ampere	13.3 Volt	2.4 Ampere	50 50 Hz
1745048457	13.73 Volt	11.2 Ampere	13.4 Volt	3.8 Ampere	50.04 50 Hz
1745048097	13.58 Volt	7.4 Ampere	13.2 Volt	0.8 Ampere	50 50 Hz
1745047737	13.58 Volt	7.8 Ampere	13.2 Volt	0.8 Ampere	50.02 50 Hz
1745047377	13.5 Volt	7.8 Ampere	13.2 Volt	0.8 Ampere	50.01 50 Hz
1745047017	13.5 Volt	8 Ampere	13.2 Volt	0.8 Ampere	49.99 50 Hz
1745046657	13.43 Volt	6.6 Ampere	13.2 Volt	0 Ampere	50 50 Hz
1745046297	13.5 Volt	7.2 Ampere	13.2 Volt	0.2 Ampere	49.97 50 Hz
1745045937	13.5 Volt	7.8 Ampere	13.2 Volt	0.6 Ampere	49.99 50 Hz
1745045577	13.35 Volt	5.6 Ampere	13.2 Volt	-0.2 Ampere	50.01 50 Hz

*Used Equation Coefficients:

70+50Ah: 0, 0.075, 0

70+50Ah: 0, 0.2, -25.6

80Ah: 0, 0.1, 0

80Ah: 0, 0.2, -25.6

Netz: 0, 0.0063, 49.853

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)