APRS Track Direct

My position About ☰

reset

VE3GUK-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE3GUK-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1732226246	13.8 Volt	10 Pkt	85 Pcnt	21.5 C
1732225646	13.8 Volt	0 Pkt	100 Pcnt	22 C
1732225046	13.8 Volt	0 Pkt	100 Pcnt	21 C
1732224446	13.8 Volt	0 Pkt	100 Pcnt	20.5 C
1732223846	13.8 Volt	0 Pkt	100 Pcnt	20.5 C
1732223246	13.8 Volt	0 Pkt	100 Pcnt	21 C
1732222646	13.8 Volt	10 Pkt	100 Pcnt	21 C
1732222046	13.8 Volt	10 Pkt	100 Pcnt	21.5 C
1732221446	13.8 Volt	10 Pkt	100 Pcnt	22 C
1732220846	13.88 Volt	10 Pkt	100 Pcnt	22 C
1732220246	13.8 Volt	10 Pkt	100 Pcnt	21.5 C
1732219646	13.8 Volt	10 Pkt	94 Pcnt	21.5 C
1732219046	13.88 Volt	10 Pkt	94 Pcnt	21.5 C
1732218446	13.8 Volt	20 Pkt	91 Pcnt	21.5 C
1732217846	13.8 Volt	20 Pkt	91 Pcnt	21.5 C
1732217246	13.8 Volt	20 Pkt	90 Pcnt	21.5 C
1732216646	13.8 Volt	20 Pkt	91 Pcnt	21 C
1732216046	13.8 Volt	20 Pkt	95 Pcnt	21 C
1732215446	13.8 Volt	20 Pkt	92 Pcnt	21.5 C
1732214846	13.8 Volt	10 Pkt	94 Pcnt	21.5 C
1732214246	13.8 Volt	10 Pkt	94 Pcnt	21 C
1732213646	13.8 Volt	10 Pkt	95 Pcnt	21 C
1732213046	13.8 Volt	10 Pkt	94 Pcnt	21 C
1732212446	13.8 Volt	10 Pkt	92 Pcnt	21 C
1732211846	13.8 Volt	0 Pkt	100 Pcnt	21.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)