This is the latest recevied telemetry packets stored in our database for station/object HS6TFM-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1732572505 | 0 Pkt | 0 Pkt | 0 Pkt | -12 dBm | 0 % |
| 1732572359 | 0 Pkt | 1 Pkt | 0 Pkt | -18 dBm | 0 % |
| 1732572213 | 0 Pkt | 3 Pkt | 0 Pkt | -13 dBm | 0 % |
| 1732572064 | 0 Pkt | 0 Pkt | 0 Pkt | -13 dBm | 0 % |
| 1732571918 | 0 Pkt | 6 Pkt | 0 Pkt | -15 dBm | 0 % |
| 1732571767 | 0 Pkt | 0 Pkt | 0 Pkt | -11 dBm | 0 % |
| 1732571621 | 0 Pkt | 3 Pkt | 0 Pkt | -16 dBm | 0 % |
| 1732571472 | 0 Pkt | 0 Pkt | 0 Pkt | -10 dBm | 0 % |
| 1732571326 | 0 Pkt | 1 Pkt | 0 Pkt | -11 dBm | 0 % |
| 1732571179 | 0 Pkt | 2 Pkt | 0 Pkt | -10 dBm | 0 % |
| 1732571031 | 0 Pkt | 1 Pkt | 0 Pkt | -10 dBm | 0 % |
| 1732570884 | 0 Pkt | 3 Pkt | 0 Pkt | -12 dBm | 0 % |
| 1732570736 | 0 Pkt | 0 Pkt | 0 Pkt | -17 dBm | 0 % |
| 1732570590 | 0 Pkt | 3 Pkt | 0 Pkt | -12 dBm | 0 % |
| 1732570441 | 0 Pkt | 0 Pkt | 0 Pkt | -16 dBm | 0 % |
| 1732570295 | 0 Pkt | 4 Pkt | 0 Pkt | -16 dBm | 0 % |
| 1732570145 | 0 Pkt | 2 Pkt | 0 Pkt | -11 dBm | 0 % |
| 1732569997 | 0 Pkt | 0 Pkt | 0 Pkt | -13 dBm | 0 % |
| 1732569851 | 0 Pkt | 4 Pkt | 0 Pkt | -13 dBm | 0 % |
| 1732569701 | 0 Pkt | 0 Pkt | 0 Pkt | -14 dBm | 0 % |
| 1732569555 | 0 Pkt | 3 Pkt | 0 Pkt | -13 dBm | 0 % |
| 1732569407 | 0 Pkt | 0 Pkt | 0 Pkt | -8 dBm | 0 % |
| 1732569261 | 0 Pkt | 3 Pkt | 0 Pkt | -11 dBm | 0 % |
| 1732569112 | 0 Pkt | 0 Pkt | 0 Pkt | -20 dBm | 0 % |
| 1732568966 | 0 Pkt | 0 Pkt | 0 Pkt | -14 dBm | 0 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)