This is the latest recevied telemetry packets stored in our database for station/object LU8JDZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
---|---|---|---|---|---|
1718716969 | 0 Pkt | 0 Pkt | 0 Pkt | -33 dBm | 10.6 V |
1718715146 | 0 Pkt | 0 Pkt | 0 Pkt | -32 dBm | 9.86 V |
1718713324 | 0 Pkt | 0 Pkt | 0 Pkt | -31 dBm | 9.99 V |
1718711499 | 0 Pkt | 0 Pkt | 0 Pkt | -33 dBm | 10.44 V |
1718709675 | 0 Pkt | 0 Pkt | 0 Pkt | -34 dBm | 10.29 V |
1718708965 | 0 Pkt | 0 Pkt | 0 Pkt | -44 dBm | 10.27 V |
1718708294 | 0 Pkt | 0 Pkt | 0 Pkt | -40 dBm | 10.27 V |
1718706430 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 10.25 V |
1718704605 | 0 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 9.86 V |
1718702782 | 0 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 10.62 V |
1718700959 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 10.23 V |
1718699136 | 0 Pkt | 0 Pkt | 0 Pkt | -41 dBm | 10.11 V |
1718697312 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 10.71 V |
1718695490 | 0 Pkt | 0 Pkt | 0 Pkt | -44 dBm | 10.93 V |
1718693666 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 10.29 V |
1718691843 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 10.11 V |
1718690020 | 0 Pkt | 0 Pkt | 0 Pkt | -38 dBm | 10.95 V |
1718688197 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 10.21 V |
1718686374 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 10.93 V |
1718684551 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 10.21 V |
1718682727 | 0 Pkt | 1 Pkt | 0 Pkt | -44 dBm | 10.01 V |
1718680902 | 0 Pkt | 0 Pkt | 0 Pkt | -48 dBm | 10.5 V |
1718680786 | 0 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 9.72 V |
1718678965 | 0 Pkt | 0 Pkt | 0 Pkt | -44 dBm | 10.27 V |
1718677139 | 0 Pkt | 2 Pkt | 0 Pkt | -44 dBm | 10.73 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)