APRS Track Direct

My position About ☰

reset

HA5SZI-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HA5SZI-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RF->INET*	INET->RF*	Repeater*	AllCount*	AllDrop*
1732471025	0 Pkts	0 Pkts	0 Pkts	102 Pkts	0 Pkts
1732470425	0 Pkts	0 Pkts	0 Pkts	74 Pkts	0 Pkts
1732469825	0 Pkts	0 Pkts	0 Pkts	89 Pkts	0 Pkts
1732469225	0 Pkts	0 Pkts	0 Pkts	103 Pkts	0 Pkts
1732468625	0 Pkts	0 Pkts	0 Pkts	60 Pkts	0 Pkts
1732468024	0 Pkts	0 Pkts	0 Pkts	110 Pkts	0 Pkts
1732467425	0 Pkts	0 Pkts	0 Pkts	100 Pkts	0 Pkts
1732466825	0 Pkts	0 Pkts	0 Pkts	75 Pkts	0 Pkts
1732466225	0 Pkts	0 Pkts	0 Pkts	95 Pkts	0 Pkts
1732465625	0 Pkts	0 Pkts	0 Pkts	97 Pkts	0 Pkts
1732465024	0 Pkts	0 Pkts	0 Pkts	57 Pkts	0 Pkts
1732464424	0 Pkts	0 Pkts	0 Pkts	96 Pkts	0 Pkts
1732463824	0 Pkts	0 Pkts	0 Pkts	87 Pkts	0 Pkts
1732463224	0 Pkts	0 Pkts	0 Pkts	60 Pkts	0 Pkts
1732462624	0 Pkts	0 Pkts	0 Pkts	11 Pkts	0 Pkts
1732462024	0 Pkts	0 Pkts	0 Pkts	103 Pkts	0 Pkts
1732461424	0 Pkts	0 Pkts	0 Pkts	235 Pkts	0 Pkts
1732460824	0 Pkts	0 Pkts	0 Pkts	222 Pkts	0 Pkts
1732460224	0 Pkts	0 Pkts	0 Pkts	62 Pkts	0 Pkts
1732459624	0 Pkts	0 Pkts	0 Pkts	92 Pkts	0 Pkts
1732459024	0 Pkts	0 Pkts	0 Pkts	82 Pkts	0 Pkts
1732458424	0 Pkts	0 Pkts	0 Pkts	69 Pkts	0 Pkts
1732457824	0 Pkts	0 Pkts	0 Pkts	110 Pkts	0 Pkts
1732457224	0 Pkts	0 Pkts	0 Pkts	95 Pkts	0 Pkts
1732456624	0 Pkts	0 Pkts	0 Pkts	56 Pkts	0 Pkts

*Used Equation Coefficients:

RF->INET: 0, 1, 0

INET->RF: 0, 1, 0

Repeater: 0, 1, 0

AllCount: 0, 1, 0

AllDrop: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)