APRS Track Direct

My position About ☰

reset

KR8MER-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KR8MER-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1732308121	0.01 Load	25.95 DegC	2291 Mb	5532 Pkt	2188 Pkt
1732307821	0 Load	25.95 DegC	2289 Mb	5655 Pkt	1988 Pkt
1732307521	0.03 Load	26.5 DegC	2289 Mb	7061 Pkt	2266 Pkt
1732307221	0.03 Load	24.85 DegC	2292 Mb	6041 Pkt	2092 Pkt
1732306922	0.01 Load	25.4 DegC	2295 Mb	5264 Pkt	2007 Pkt
1732306622	0 Load	27.05 DegC	2290 Mb	5268 Pkt	2004 Pkt
1732306321	0 Load	24.3 DegC	2288 Mb	5348 Pkt	2202 Pkt
1732306022	0 Load	25.95 DegC	2291 Mb	5475 Pkt	2078 Pkt
1732305721	0.02 Load	25.95 DegC	2290 Mb	5407 Pkt	2336 Pkt
1732305422	0.03 Load	25.4 DegC	2292 Mb	5120 Pkt	2062 Pkt
1732305121	0 Load	25.4 DegC	2294 Mb	5294 Pkt	2164 Pkt
1732304822	0.02 Load	24.85 DegC	2294 Mb	5592 Pkt	2146 Pkt
1732304521	0.01 Load	24.85 DegC	2295 Mb	5285 Pkt	2069 Pkt
1732304221	0.02 Load	23.75 DegC	2293 Mb	5410 Pkt	2014 Pkt
1732303921	0.05 Load	24.3 DegC	2292 Mb	5292 Pkt	1987 Pkt
1732303622	0.03 Load	24.3 DegC	2297 Mb	5207 Pkt	2091 Pkt
1732303322	0.02 Load	24.85 DegC	2297 Mb	5298 Pkt	2172 Pkt
1732303021	0.02 Load	24.85 DegC	2299 Mb	5152 Pkt	2125 Pkt
1732302722	0.04 Load	25.95 DegC	2296 Mb	5296 Pkt	2183 Pkt
1732302421	0.03 Load	24.85 DegC	2298 Mb	5428 Pkt	2291 Pkt
1732302121	0.01 Load	24.3 DegC	2291 Mb	5478 Pkt	2613 Pkt
1732301822	0.03 Load	24.85 DegC	2295 Mb	5587 Pkt	2479 Pkt
1732301521	0.03 Load	24.3 DegC	2293 Mb	5196 Pkt	2208 Pkt
1732301221	0.01 Load	25.4 DegC	2294 Mb	5168 Pkt	2172 Pkt
1732300922	0.05 Load	23.75 DegC	2296 Mb	5075 Pkt	2043 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)