This is the latest recevied telemetry packets stored in our database for station/object SR4EL. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Avg 10m* | Avg 10m* | RxPkts* | IGateDropRx* | TxPkts* |
---|---|---|---|---|---|
1732275461 | 0.12 Rx Erlang | 0 Tx Erlang | 110 count/10m | 0 count/10m | 0 count/10m |
1732274261 | 0.08 Rx Erlang | 0 Tx Erlang | 74 count/10m | 0 count/10m | 0 count/10m |
1732273061 | 0.08 Rx Erlang | 0 Tx Erlang | 78 count/10m | 0 count/10m | 0 count/10m |
1732271861 | 0.09 Rx Erlang | 0 Tx Erlang | 101 count/10m | 0 count/10m | 0 count/10m |
1732270661 | 0.13 Rx Erlang | 0 Tx Erlang | 162 count/10m | 0 count/10m | 0 count/10m |
1732269461 | 0.13 Rx Erlang | 0 Tx Erlang | 153 count/10m | 0 count/10m | 0 count/10m |
1732268261 | 0.12 Rx Erlang | 0 Tx Erlang | 140 count/10m | 0 count/10m | 0 count/10m |
1732267061 | 0.11 Rx Erlang | 0 Tx Erlang | 127 count/10m | 0 count/10m | 0 count/10m |
1732265861 | 0.12 Rx Erlang | 0 Tx Erlang | 134 count/10m | 0 count/10m | 0 count/10m |
1732264661 | 0.13 Rx Erlang | 0 Tx Erlang | 141 count/10m | 0 count/10m | 0 count/10m |
1732263461 | 0.12 Rx Erlang | 0 Tx Erlang | 150 count/10m | 0 count/10m | 0 count/10m |
1732262261 | 0.11 Rx Erlang | 0 Tx Erlang | 135 count/10m | 0 count/10m | 0 count/10m |
1732261061 | 0.14 Rx Erlang | 0 Tx Erlang | 162 count/10m | 0 count/10m | 0 count/10m |
1732259861 | 0.11 Rx Erlang | 0 Tx Erlang | 112 count/10m | 0 count/10m | 0 count/10m |
1732258661 | 0.14 Rx Erlang | 0 Tx Erlang | 136 count/10m | 0 count/10m | 0 count/10m |
1732257461 | 0.13 Rx Erlang | 0 Tx Erlang | 135 count/10m | 0 count/10m | 0 count/10m |
*Used Equation Coefficients:
Avg 10m: 0, 0.005, 0
Avg 10m: 0, 0.005, 0
RxPkts: 0, 1, 0
IGateDropRx: 0, 1, 0
TxPkts: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)