This is the latest recevied telemetry packets stored in our database for station/object PY1TCM-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RSSI* | VBAT* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790645784 | -49 dbm | 2.95 V | 0 | 0 | 0 |
| 1790645184 | -48 dbm | 2.95 V | 0 | 0 | 0 |
| 1790644584 | -48 dbm | 2.95 V | 0 | 0 | 0 |
| 1790643984 | -50 dbm | 2.95 V | 0 | 0 | 0 |
| 1790643383 | -49 dbm | 2.95 V | 0 | 0 | 0 |
| 1790642784 | -49 dbm | 2.95 V | 0 | 0 | 0 |
| 1790642184 | -49 dbm | 2.95 V | 0 | 0 | 0 |
| 1790641584 | -47 dbm | 2.95 V | 0 | 0 | 0 |
| 1790640984 | -49 dbm | 2.95 V | 0 | 0 | 0 |
| 1790640384 | -49 dbm | 2.95 V | 0 | 0 | 0 |
| 1790639784 | -50 dbm | 2.95 V | 0 | 0 | 0 |
| 1790639183 | -52 dbm | 2.95 V | 0 | 0 | 0 |
| 1790638583 | -48 dbm | 2.95 V | 0 | 0 | 0 |
| 1790637984 | -50 dbm | 2.95 V | 0 | 0 | 0 |
| 1790637384 | -47 dbm | 2.95 V | 0 | 0 | 0 |
| 1790636783 | -47 dbm | 2.95 V | 0 | 0 | 0 |
| 1790636184 | -47 dbm | 2.95 V | 0 | 0 | 0 |
| 1790635584 | -47 dbm | 2.95 V | 0 | 0 | 0 |
| 1790634984 | -49 dbm | 2.95 V | 0 | 0 | 0 |
| 1790634384 | -50 dbm | 2.95 V | 0 | 0 | 0 |
| 1790633784 | -47 dbm | 2.95 V | 0 | 0 | 0 |
| 1790633183 | -48 dbm | 2.95 V | 0 | 0 | 0 |
| 1790632584 | -53 dbm | 2.95 V | 0 | 0 | 0 |
| 1790631984 | -50 dbm | 2.95 V | 0 | 0 | 0 |
| 1790631384 | -50 dbm | 2.95 V | 0 | 0 | 0 |
*Used Equation Coefficients:
RSSI: 0, -1, 0
VBAT: 0, 0.01, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)