This is the latest recevied telemetry packets stored in our database for station/object OK5TVR-17. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1782505981 | 1 | 0 | 1 | 48 | 55.56 |
| 1782505080 | 1 | 0 | 1 | 47 | 55.56 |
| 1782504180 | 1 | 0 | 1 | 46 | 55.56 |
| 1782504179 | 1 | 0 | 1 | 46 | 55.56 |
| 1782503279 | 1 | 0 | 1 | 45 | 56.11 |
| 1782502378 | 1 | 0 | 1 | 44 | 56.67 |
| 1782501477 | 1 | 0 | 1 | 43 | 58.33 |
| 1782501476 | 1 | 0 | 1 | 43 | 58.33 |
| 1782500575 | 1 | 0 | 1 | 42 | 57.78 |
| 1782500575 | 1 | 0 | 1 | 42 | 57.78 |
| 1782499674 | 1 | 0 | 1 | 41 | 58.89 |
| 1782498773 | 1 | 0 | 1 | 40 | 60 |
| 1782498773 | 1 | 0 | 1 | 40 | 60 |
| 1782497872 | 1 | 0 | 1 | 39 | 60.56 |
| 1782497872 | 1 | 0 | 1 | 39 | 60.56 |
| 1782496070 | 1 | 0 | 1 | 37 | 65.56 |
| 1782495170 | 1 | 0 | 1 | 36 | 66.11 |
| 1782492466 | 1 | 0 | 1 | 33 | 66.67 |
| 1782492466 | 1 | 0 | 1 | 33 | 66.67 |
| 1782491565 | 1 | 0 | 1 | 32 | 67.22 |
| 1782489763 | 1 | 0 | 1 | 30 | 67.22 |
| 1782488862 | 1 | 0 | 1 | 29 | 67.78 |
| 1782488862 | 1 | 0 | 1 | 29 | 67.78 |
| 1782487961 | 1 | 0 | 1 | 28 | 67.78 |
| 1782487060 | 1 | 0 | 1 | 27 | 67.78 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)