This is the latest recevied telemetry packets stored in our database for station/object K2UNI-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RFIn* | RFiGate* | DigiRpt* | Temp* | InetiGate* |
|---|---|---|---|---|---|
| 1782499150 | 260 Pkts | 254 Pkts | 47 Pkts | 62 C | 0 Pkts |
| 1782495550 | 225 Pkts | 220 Pkts | 51 Pkts | 61 C | 0 Pkts |
| 1782491950 | 258 Pkts | 249 Pkts | 46 Pkts | 61 C | 0 Pkts |
| 1782488350 | 286 Pkts | 278 Pkts | 66 Pkts | 61 C | 0 Pkts |
| 1782484750 | 293 Pkts | 287 Pkts | 68 Pkts | 61 C | 0 Pkts |
| 1782481150 | 359 Pkts | 353 Pkts | 73 Pkts | 61 C | 0 Pkts |
| 1782477550 | 343 Pkts | 336 Pkts | 72 Pkts | 61 C | 0 Pkts |
| 1782473950 | 342 Pkts | 333 Pkts | 62 Pkts | 60 C | 1 Pkts |
| 1782470350 | 265 Pkts | 254 Pkts | 64 Pkts | 61 C | 0 Pkts |
| 1782466750 | 236 Pkts | 223 Pkts | 45 Pkts | 61 C | 0 Pkts |
| 1782461794 | 272 Pkts | 263 Pkts | 59 Pkts | 61 C | 0 Pkts |
| 1782458194 | 266 Pkts | 260 Pkts | 56 Pkts | 61 C | 0 Pkts |
| 1782454595 | 308 Pkts | 297 Pkts | 57 Pkts | 61 C | 0 Pkts |
| 1782450994 | 326 Pkts | 317 Pkts | 59 Pkts | 61 C | 0 Pkts |
| 1782447394 | 316 Pkts | 307 Pkts | 58 Pkts | 61 C | 0 Pkts |
| 1782443794 | 316 Pkts | 307 Pkts | 61 Pkts | 61 C | 0 Pkts |
| 1782440193 | 228 Pkts | 220 Pkts | 42 Pkts | 61 C | 0 Pkts |
| 1782436594 | 240 Pkts | 230 Pkts | 40 Pkts | 61 C | 0 Pkts |
| 1782432994 | 233 Pkts | 223 Pkts | 36 Pkts | 61 C | 0 Pkts |
*Used Equation Coefficients:
RFIn: 0, 1, 0
RFiGate: 0, 1, 0
DigiRpt: 0, 1, 0
Temp: 0, 1, 0
InetiGate: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)