This is the latest recevied telemetry packets stored in our database for station/object W5SMB-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790600114 | 462 Volts | 618 Deg.F | 0 | 0 | 0 |
| 1790600092 | 485 Volts | 618 Deg.F | 0 | 0 | 0 |
| 1790600033 | 481 Volts | 618 Deg.F | 0 | 0 | 0 |
| 1790600002 | 478 Volts | 618 Deg.F | 0 | 0 | 0 |
| 1790599972 | 483 Volts | 618 Deg.F | 0 | 0 | 0 |
| 1790599934 | 484 Volts | 618 Deg.F | 0 | 0 | 0 |
| 1790599904 | 479 Volts | 618 Deg.F | 0 | 0 | 0 |
| 1790599873 | 481 Volts | 617 Deg.F | 0 | 0 | 0 |
| 1790599843 | 482 Volts | 617 Deg.F | 0 | 0 | 0 |
| 1790599824 | 481 Volts | 617 Deg.F | 0 | 0 | 0 |
| 1790599762 | 481 Volts | 617 Deg.F | 0 | 0 | 0 |
| 1790599732 | 480 Volts | 617 Deg.F | 0 | 0 | 0 |
| 1790599702 | 475 Volts | 617 Deg.F | 0 | 0 | 0 |
| 1790599672 | 477 Volts | 617 Deg.F | 0 | 0 | 0 |
| 1790599641 | 483 Volts | 616 Deg.F | 0 | 0 | 0 |
| 1790599580 | 475 Volts | 616 Deg.F | 0 | 0 | 0 |
| 1790599469 | 481 Volts | 615 Deg.F | 0 | 0 | 0 |
| 1790599438 | 481 Volts | 615 Deg.F | 0 | 0 | 0 |
| 1790599340 | 482 Volts | 614 Deg.F | 0 | 0 | 0 |
| 1790599330 | 482 Volts | 613 Deg.F | 0 | 0 | 0 |
| 1790599305 | 478 Volts | 613 Deg.F | 0 | 0 | 0 |
| 1790599275 | 480 Volts | 613 Deg.F | 0 | 0 | 0 |
| 1790599245 | 480 Volts | 613 Deg.F | 0 | 0 | 0 |
| 1790599202 | 478 Volts | 612 Deg.F | 0 | 0 | 0 |
| 1790599141 | 483 Volts | 611 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)