APRS Track Direct

My position About ☰

reset

YM4KMF Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM4KMF. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1791745071	32 Pkt	15 Pkt	31 dBm	13.06 V
1791744142	38 Pkt	4 Pkt	31 dBm	13.08 V
1791743214	1 Pkt	1 Pkt	31 dBm	13.08 V
1791742240	43 Pkt	14 Pkt	31 dBm	13.08 V
1791741310	38 Pkt	7 Pkt	31 dBm	13.1 V
1791740381	30 Pkt	0 Pkt	31 dBm	13.08 V
1791739452	36 Pkt	6 Pkt	31 dBm	13.08 V
1791738524	30 Pkt	11 Pkt	31 dBm	13.1 V
1791737597	41 Pkt	5 Pkt	31 dBm	13.13 V
1791736669	45 Pkt	8 Pkt	31 dBm	13.13 V
1791735739	33 Pkt	10 Pkt	31 dBm	13.1 V
1791734813	29 Pkt	0 Pkt	31 dBm	13.15 V
1791733883	31 Pkt	1 Pkt	31 dBm	13.17 V
1791732957	63 Pkt	10 Pkt	31 dBm	13.21 V
1791732028	70 Pkt	10 Pkt	31 dBm	13.37 V
1791731097	52 Pkt	12 Pkt	31 dBm	13.97 V
1791730168	56 Pkt	12 Pkt	31 dBm	13.97 V
1791729237	72 Pkt	15 Pkt	31 dBm	13.9 V
1791728308	55 Pkt	13 Pkt	31 dBm	13.97 V
1791727377	43 Pkt	13 Pkt	31 dBm	13.95 V
1791726451	51 Pkt	13 Pkt	31 dBm	13.95 V
1791725517	43 Pkt	10 Pkt	31 dBm	13.95 V
1791724588	38 Pkt	17 Pkt	31 dBm	13.95 V
1791723661	34 Pkt	8 Pkt	31 dBm	13.95 V
1791722732	54 Pkt	7 Pkt	31 dBm	13.95 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)