APRS Track Direct

My position About ☰

reset

NY3PD-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object NY3PD-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RFIn*	RFiGate*	Temp*	InetIn*
1786721438	105 Pkts	105 Pkts	50 C	12 Pkts
1786719638	101 Pkts	101 Pkts	50 C	84 Pkts
1786717838	101 Pkts	101 Pkts	50 C	42 Pkts
1786716038	126 Pkts	126 Pkts	50 C	145 Pkts
1786714238	168 Pkts	168 Pkts	50 C	33 Pkts
1786712438	221 Pkts	221 Pkts	50 C	133 Pkts
1786710638	203 Pkts	203 Pkts	50 C	78 Pkts
1786708838	134 Pkts	132 Pkts	50 C	179 Pkts
1786707038	136 Pkts	136 Pkts	50 C	92 Pkts
1786705238	116 Pkts	115 Pkts	50 C	142 Pkts
1786703438	116 Pkts	116 Pkts	50 C	34 Pkts
1786701638	112 Pkts	112 Pkts	50 C	152 Pkts
1786699838	127 Pkts	126 Pkts	50 C	55 Pkts
1786698038	89 Pkts	89 Pkts	50 C	127 Pkts
1786696238	87 Pkts	87 Pkts	50 C	67 Pkts
1786694438	78 Pkts	77 Pkts	50 C	92 Pkts
1786692638	104 Pkts	104 Pkts	50 C	30 Pkts
1786690838	91 Pkts	91 Pkts	50 C	110 Pkts
1786689038	108 Pkts	108 Pkts	50 C	36 Pkts
1786687238	95 Pkts	95 Pkts	50 C	109 Pkts
1786685438	90 Pkts	89 Pkts	50 C	61 Pkts
1786683638	98 Pkts	98 Pkts	50 C	91 Pkts
1786681838	74 Pkts	71 Pkts	50 C	33 Pkts
1786678237	81 Pkts	80 Pkts	50 C	25 Pkts
1786676437	93 Pkts	93 Pkts	50 C	86 Pkts

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetIn: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)