This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1744951442 | 10.75 | 58.65 | 0 | 0 | 0 |
| 1744951348 | 10.75 | 58.65 | 0 | 0 | 0 |
| 1744951258 | 10.78 | 57.77 | 0 | 0 | 0 |
| 1744951168 | 10.75 | 58.65 | 0 | 0 | 0 |
| 1744951078 | 10.78 | 58.65 | 0 | 0 | 0 |
| 1744950988 | 10.75 | 58.65 | 0 | 0 | 0 |
| 1744950808 | 10.75 | 58.65 | 0 | 0 | 0 |
| 1744950718 | 10.75 | 58.65 | 0 | 0 | 0 |
| 1744950628 | 10.75 | 57.77 | 0 | 0 | 0 |
| 1744950538 | 10.75 | 57.77 | 0 | 0 | 0 |
| 1744950448 | 10.75 | 57.77 | 0 | 0 | 0 |
| 1744950178 | 10.75 | 57.77 | 0 | 0 | 0 |
| 1744950080 | 10.78 | 57.77 | 0 | 0 | 0 |
| 1744949990 | 10.78 | 57.77 | 0 | 0 | 0 |
| 1744949900 | 10.78 | 57.77 | 0 | 0 | 0 |
| 1744949629 | 10.75 | 57.77 | 0 | 0 | 0 |
| 1744949539 | 10.78 | 56.89 | 0 | 0 | 0 |
| 1744949447 | 10.78 | 56.89 | 0 | 0 | 0 |
| 1744949357 | 10.78 | 56.89 | 0 | 0 | 0 |
| 1744949267 | 10.78 | 56.89 | 0 | 0 | 0 |
| 1744949177 | 10.78 | 56.01 | 0 | 0 | 0 |
| 1744949088 | 10.78 | 56.01 | 0 | 0 | 0 |
| 1744948906 | 10.78 | 56.01 | 0 | 0 | 0 |
| 1744948625 | 10.78 | 56.01 | 0 | 0 | 0 |
| 1744948441 | 10.81 | 55.13 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.88, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)