APRS Track Direct

My position About ☰

reset

E25MVI-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E25MVI-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1786746289	0 Pkt	0 Pkt	-63 dBm	0.06 V
1786745685	0 Pkt	0 Pkt	-63 dBm	0.33 V
1786745069	0 Pkt	0 Pkt	-63 dBm	0.12 V
1786744461	0 Pkt	0 Pkt	-61 dBm	0.25 V
1786743849	1 Pkt	0 Pkt	-61 dBm	0.16 V
1786743239	0 Pkt	0 Pkt	-64 dBm	0.27 V
1786742629	0 Pkt	0 Pkt	-64 dBm	0.16 V
1786742019	1 Pkt	0 Pkt	-63 dBm	0.18 V
1786741409	1 Pkt	0 Pkt	-63 dBm	0.18 V
1786740782	1 Pkt	1 Pkt	-62 dBm	0.37 V
1786740172	0 Pkt	1 Pkt	-63 dBm	0.12 V
1786739562	0 Pkt	0 Pkt	-63 dBm	0.14 V
1786738952	0 Pkt	0 Pkt	-64 dBm	0.18 V
1786738342	0 Pkt	0 Pkt	-63 dBm	0.16 V
1786737732	1 Pkt	0 Pkt	-64 dBm	0.08 V
1786737105	1 Pkt	0 Pkt	-63 dBm	0.14 V
1786736495	0 Pkt	0 Pkt	-63 dBm	0.14 V
1786735885	0 Pkt	0 Pkt	-64 dBm	0.16 V
1786735274	0 Pkt	0 Pkt	-62 dBm	0.18 V
1786734664	0 Pkt	0 Pkt	-64 dBm	0.16 V
1786734054	1 Pkt	0 Pkt	-63 dBm	0.12 V
1786733444	0 Pkt	0 Pkt	-63 dBm	0.25 V
1786732834	0 Pkt	0 Pkt	-62 dBm	0.27 V
1786732224	0 Pkt	0 Pkt	-64 dBm	0.12 V
1786731614	0 Pkt	0 Pkt	-60 dBm	0.16 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)