APRS Track Direct

My position About ☰

reset

IZ8AWQ-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ8AWQ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1786727082	13.88 Volt	20 Pkt	20 Pkt	74 Pcnt
1786725881	13.88 Volt	40 Pkt	40 Pkt	81 Pcnt
1786724682	13.88 Volt	30 Pkt	30 Pkt	79 Pcnt
1786723482	13.88 Volt	20 Pkt	20 Pkt	76 Pcnt
1786722282	13.88 Volt	0 Pkt	0 Pkt	50 Pcnt
1786721082	13.88 Volt	0 Pkt	0 Pkt	50 Pcnt
1786719882	13.88 Volt	0 Pkt	0 Pkt	62 Pcnt
1786718682	13.88 Volt	0 Pkt	0 Pkt	71 Pcnt
1786717482	13.88 Volt	0 Pkt	0 Pkt	75 Pcnt
1786716282	13.88 Volt	0 Pkt	0 Pkt	71 Pcnt
1786715082	13.88 Volt	0 Pkt	0 Pkt	66 Pcnt
1786713882	13.88 Volt	0 Pkt	0 Pkt	62 Pcnt
1786712682	13.88 Volt	0 Pkt	0 Pkt	55 Pcnt
1786711482	13.88 Volt	0 Pkt	0 Pkt	57 Pcnt
1786710282	13.88 Volt	0 Pkt	0 Pkt	62 Pcnt
1786709082	13.88 Volt	0 Pkt	0 Pkt	55 Pcnt
1786707882	13.88 Volt	0 Pkt	0 Pkt	62 Pcnt
1786706682	13.88 Volt	0 Pkt	0 Pkt	75 Pcnt
1786705482	13.88 Volt	0 Pkt	0 Pkt	71 Pcnt
1786704282	13.88 Volt	0 Pkt	0 Pkt	66 Pcnt
1786703082	13.88 Volt	0 Pkt	0 Pkt	55 Pcnt
1786701882	13.88 Volt	0 Pkt	0 Pkt	71 Pcnt
1786700682	13.88 Volt	0 Pkt	0 Pkt	57 Pcnt
1786699482	13.88 Volt	0 Pkt	0 Pkt	71 Pcnt
1786698282	13.88 Volt	0 Pkt	0 Pkt	55 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)