APRS Track Direct

My position About ☰

reset

9A1W-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A1W-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	V AC*	Temp I*	Rx1h*	Dg1h*
1790667913	13.95 Volt	6.98 Volt	19 C	990 Pkt	180 Pkt
1790667613	13.95 Volt	6.98 Volt	19 C	980 Pkt	180 Pkt
1790667613	13.95 Volt	6.98 Volt	19 C	980 Pkt	180 Pkt
1790667314	13.95 Volt	6.98 Volt	19 C	990 Pkt	180 Pkt
1790667313	13.95 Volt	6.98 Volt	19 C	990 Pkt	180 Pkt
1790667014	13.95 Volt	6.98 Volt	18.5 C	1010 Pkt	190 Pkt
1790667013	13.95 Volt	6.98 Volt	18.5 C	1010 Pkt	190 Pkt
1790666714	13.95 Volt	6.98 Volt	18.5 C	990 Pkt	190 Pkt
1790666713	13.95 Volt	6.98 Volt	18.5 C	990 Pkt	190 Pkt
1790666415	13.95 Volt	6.98 Volt	18.5 C	1000 Pkt	190 Pkt
1790666413	13.95 Volt	6.98 Volt	18.5 C	1000 Pkt	190 Pkt
1790666114	13.95 Volt	6.98 Volt	18.5 C	990 Pkt	190 Pkt
1790666113	13.95 Volt	6.98 Volt	18.5 C	990 Pkt	190 Pkt
1790665814	13.95 Volt	6.98 Volt	18.5 C	1010 Pkt	190 Pkt
1790665813	13.95 Volt	6.98 Volt	18.5 C	1010 Pkt	190 Pkt
1790665514	13.95 Volt	6.98 Volt	18 C	960 Pkt	180 Pkt
1790665513	13.95 Volt	6.98 Volt	18 C	960 Pkt	180 Pkt
1790665214	13.95 Volt	6.98 Volt	18 C	950 Pkt	180 Pkt
1790665213	13.95 Volt	6.98 Volt	18 C	950 Pkt	180 Pkt
1790664918	13.95 Volt	6.98 Volt	18 C	940 Pkt	180 Pkt
1790664913	13.95 Volt	6.98 Volt	18 C	940 Pkt	180 Pkt
1790664616	13.95 Volt	6.98 Volt	17.5 C	940 Pkt	190 Pkt
1790664613	13.95 Volt	6.98 Volt	17.5 C	940 Pkt	190 Pkt
1790664314	13.95 Volt	6.98 Volt	17.5 C	930 Pkt	180 Pkt
1790664313	13.95 Volt	6.98 Volt	17.5 C	930 Pkt	180 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

V AC: 0, 0.075, 0

Temp I: 0, 0.5, -64

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)