This is the latest recevied telemetry packets stored in our database for station/object N0DSS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274110 | 187 | 0 | 53 | 0 | 81 |
| 1770154651 | 186 | 0 | 34 | 0 | 60 |
| 1770152851 | 186 | 0 | 29 | 0 | 61 |
| 1770151051 | 186 | 0 | 28 | 0 | 57 |
| 1770149251 | 186 | 0 | 28 | 0 | 53 |
| 1770147451 | 186 | 0 | 31 | 0 | 59 |
| 1770145651 | 186 | 0 | 27 | 0 | 59 |
| 1770143851 | 186 | 0 | 21 | 0 | 48 |
| 1770142051 | 186 | 0 | 21 | 0 | 50 |
| 1770140251 | 186 | 0 | 20 | 0 | 53 |
| 1770138452 | 186 | 0 | 22 | 0 | 55 |
| 1770136652 | 186 | 0 | 27 | 0 | 61 |
| 1770134852 | 187 | 0 | 28 | 0 | 61 |
| 1770133052 | 186 | 0 | 29 | 0 | 64 |
| 1770131252 | 186 | 0 | 34 | 0 | 70 |
| 1770129452 | 187 | 0 | 44 | 0 | 68 |
| 1770127652 | 186 | 0 | 43 | 0 | 68 |
| 1770125852 | 186 | 0 | 37 | 0 | 68 |
| 1770124052 | 187 | 0 | 34 | 0 | 71 |
| 1770122253 | 186 | 0 | 30 | 0 | 74 |
| 1770120453 | 186 | 0 | 29 | 0 | 75 |
| 1770118653 | 186 | 0 | 29 | 0 | 69 |
| 1770116853 | 186 | 0 | 28 | 0 | 69 |
| 1770115053 | 187 | 0 | 24 | 0 | 70 |
| 1770113253 | 186 | 0 | 24 | 0 | 73 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)