APRS Track Direct

My position About ☰

reset

F6ZBZ-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F6ZBZ-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff t*
1732274860	14.06 Volt	170 Pkt	50 Pkt	63 Pcnt	69 Pcnt
1732274560	14.06 Volt	170 Pkt	50 Pkt	64 Pcnt	69 Pcnt
1732274260	14.06 Volt	200 Pkt	60 Pkt	65 Pcnt	69 Pcnt
1732273960	14.06 Volt	220 Pkt	60 Pkt	67 Pcnt	69 Pcnt
1732273660	14.06 Volt	230 Pkt	70 Pkt	67 Pcnt	69 Pcnt
1732273360	14.06 Volt	250 Pkt	80 Pkt	70 Pcnt	69 Pcnt
1732273060	14.06 Volt	260 Pkt	80 Pkt	71 Pcnt	69 Pcnt
1732272760	14.06 Volt	260 Pkt	80 Pkt	72 Pcnt	69 Pcnt
1732272460	14.06 Volt	270 Pkt	80 Pkt	72 Pcnt	69 Pcnt
1732272160	14.06 Volt	270 Pkt	80 Pkt	72 Pcnt	69 Pcnt
1732271860	14.06 Volt	260 Pkt	80 Pkt	71 Pcnt	69 Pcnt
1732271560	14.06 Volt	260 Pkt	80 Pkt	72 Pcnt	69 Pcnt
1732271260	14.06 Volt	240 Pkt	70 Pkt	70 Pcnt	69 Pcnt
1732270960	14.06 Volt	240 Pkt	70 Pkt	70 Pcnt	69 Pcnt
1732270660	14.06 Volt	240 Pkt	70 Pkt	72 Pcnt	69 Pcnt
1732270360	14.06 Volt	230 Pkt	70 Pkt	72 Pcnt	69 Pcnt
1732270060	14.06 Volt	220 Pkt	60 Pkt	72 Pcnt	69 Pcnt
1732269760	14.06 Volt	220 Pkt	60 Pkt	72 Pcnt	69 Pcnt
1732269460	14.06 Volt	220 Pkt	70 Pkt	71 Pcnt	69 Pcnt
1732269160	14.06 Volt	220 Pkt	70 Pkt	70 Pcnt	69 Pcnt
1732268860	14.06 Volt	230 Pkt	70 Pkt	72 Pcnt	69 Pcnt
1732268560	14.06 Volt	220 Pkt	60 Pkt	71 Pcnt	69 Pcnt
1732268260	14.06 Volt	230 Pkt	60 Pkt	74 Pcnt	69 Pcnt
1732267960	14.06 Volt	230 Pkt	70 Pkt	74 Pcnt	69 Pcnt
1732267660	14.06 Volt	250 Pkt	70 Pkt	77 Pcnt	69 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff t: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)