This is the latest recevied telemetry packets stored in our database for station/object SANDOX-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1732211253 | 0 Pkt | 4 Pkt | 0 Pkt | -47 dBm | 0 % |
| 1732211002 | 0 Pkt | 0 Pkt | 0 Pkt | -49 dBm | 0 % |
| 1732210752 | 0 Pkt | 3 Pkt | 0 Pkt | -47 dBm | 0 % |
| 1732210502 | 0 Pkt | 2 Pkt | 0 Pkt | -47 dBm | 0 % |
| 1732210251 | 0 Pkt | 0 Pkt | 0 Pkt | -48 dBm | 0 % |
| 1732210032 | 0 Pkt | 2 Pkt | 0 Pkt | -48 dBm | 0 % |
| 1732209752 | 0 Pkt | 3 Pkt | 0 Pkt | -47 dBm | 0 % |
| 1732209500 | 0 Pkt | 3 Pkt | 0 Pkt | -47 dBm | 0 % |
| 1732209249 | 0 Pkt | 1 Pkt | 0 Pkt | -47 dBm | 0 % |
| 1732208999 | 0 Pkt | 2 Pkt | 0 Pkt | -50 dBm | 0 % |
| 1732208749 | 0 Pkt | 1 Pkt | 0 Pkt | -47 dBm | 0 % |
| 1732208497 | 0 Pkt | 1 Pkt | 0 Pkt | -48 dBm | 0 % |
| 1732208246 | 0 Pkt | 4 Pkt | 0 Pkt | -47 dBm | 0 % |
| 1732207996 | 0 Pkt | 5 Pkt | 0 Pkt | -48 dBm | 0 % |
| 1732207745 | 0 Pkt | 4 Pkt | 0 Pkt | -48 dBm | 0 % |
| 1732207495 | 0 Pkt | 1 Pkt | 0 Pkt | -46 dBm | 0 % |
| 1732207243 | 0 Pkt | 3 Pkt | 0 Pkt | -46 dBm | 0 % |
| 1732206997 | 0 Pkt | 0 Pkt | 0 Pkt | -47 dBm | 0 % |
| 1732206743 | 0 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 0 % |
| 1732206492 | 0 Pkt | 1 Pkt | 0 Pkt | -47 dBm | 0 % |
| 1732206242 | 0 Pkt | 5 Pkt | 0 Pkt | -46 dBm | 0 % |
| 1732205991 | 0 Pkt | 2 Pkt | 0 Pkt | -48 dBm | 0 % |
| 1732205742 | 0 Pkt | 0 Pkt | 0 Pkt | -48 dBm | 0 % |
| 1732205490 | 0 Pkt | 0 Pkt | 0 Pkt | -49 dBm | 0 % |
| 1732205242 | 0 Pkt | 0 Pkt | 0 Pkt | -48 dBm | 0 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)