APRS Track Direct

My position About ☰

reset

KW3DX-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KW3DX-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1749310650	14.25 Volt	320 Pkt	110 Pkt	94 Pcnt
1749310351	14.25 Volt	320 Pkt	110 Pkt	93 Pcnt
1749310350	14.25 Volt	320 Pkt	110 Pkt	93 Pcnt
1749310050	14.25 Volt	330 Pkt	110 Pkt	93 Pcnt
1749309752	14.25 Volt	320 Pkt	110 Pkt	92 Pcnt
1749309750	14.25 Volt	320 Pkt	110 Pkt	92 Pcnt
1749309450	14.25 Volt	320 Pkt	110 Pkt	93 Pcnt
1749309151	14.25 Volt	310 Pkt	110 Pkt	93 Pcnt
1749309150	14.25 Volt	310 Pkt	110 Pkt	93 Pcnt
1749308850	14.25 Volt	310 Pkt	110 Pkt	93 Pcnt
1749308553	14.25 Volt	310 Pkt	110 Pkt	92 Pcnt
1749308550	14.25 Volt	310 Pkt	110 Pkt	92 Pcnt
1749308250	14.25 Volt	310 Pkt	110 Pkt	93 Pcnt
1749307952	14.25 Volt	310 Pkt	110 Pkt	92 Pcnt
1749307950	14.25 Volt	310 Pkt	110 Pkt	92 Pcnt
1749307650	14.25 Volt	310 Pkt	110 Pkt	92 Pcnt
1749307350	14.25 Volt	300 Pkt	100 Pkt	93 Pcnt
1749307050	14.25 Volt	310 Pkt	100 Pkt	93 Pcnt
1749306751	14.25 Volt	310 Pkt	100 Pkt	94 Pcnt
1749306750	14.25 Volt	310 Pkt	100 Pkt	94 Pcnt
1749306450	14.25 Volt	300 Pkt	100 Pkt	95 Pcnt
1749306150	14.25 Volt	300 Pkt	100 Pkt	94 Pcnt
1749305858	14.25 Volt	340 Pkt	110 Pkt	93 Pcnt
1749305850	14.25 Volt	290 Pkt	100 Pkt	94 Pcnt
1749305550	14.25 Volt	290 Pkt	100 Pkt	93 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)