This is the latest recevied telemetry packets stored in our database for station/object CE3SUR-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1762367929 | 6 | 34.7 C | 4.2 V | 520 M | 0 |
| 1762364929 | 6 | 34.8 C | 4.22 V | 480 M | 0 |
| 1762361929 | 6 | 35.2 C | 4.22 V | 510 M | 0 |
| 1762358948 | 7 | 36.1 C | 4.22 V | 540 M | 0 |
| 1762355503 | 5 | 32.8 C | 4.22 V | 500 M | 0 |
| 1762354149 | 7 | 29.6 C | 4.22 V | 500 M | 0 |
| 1762352311 | 8 | 26.6 C | 4.23 V | 480 M | 0 |
| 1762352048 | 7 | 25.7 C | 4.22 V | 470 M | 0 |
| 1762351481 | 8 | 22.8 C | 4.23 V | 500 M | 0 |
| 1762350223 | 7 | 21.5 C | 4.23 V | 520 M | 0 |
| 1762347335 | 6 | 20.5 C | 4.23 V | 540 M | 0 |
| 1762344438 | 7 | 19.4 C | 4.23 V | 510 M | 0 |
| 1762341532 | 7 | 18.9 C | 4.23 V | 530 M | 0 |
| 1762338986 | 6 | 19 C | 4.23 V | 490 M | 0 |
| 1762336218 | 4 | 20.1 C | 4.23 V | 510 M | 0 |
| 1762335207 | 4 | 19.7 C | 4.23 V | 520 M | 0 |
| 1762332650 | 5 | 20 C | 4.23 V | 510 M | 0 |
| 1762330076 | 8 | 20.3 C | 4.23 V | 520 M | 0 |
| 1762327075 | 7 | 20.7 C | 4.23 V | 530 M | 0 |
| 1762324134 | 6 | 21.3 C | 4.23 V | 490 M | 0 |
| 1762321465 | 9 | 21.9 C | 4.23 V | 510 M | 0 |
| 1762318466 | 5 | 22.6 C | 4.23 V | 500 M | 0 |
| 1762315992 | 6 | 23.3 C | 4.23 V | 490 M | 0 |
| 1762313378 | 6 | 24 C | 4.23 V | 540 M | 0 |
| 1762310378 | 7 | 25.1 C | 4.23 V | 530 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)