This is the latest recevied telemetry packets stored in our database for station/object SP8EBC-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Rx10min* | Tx10min* | Digi10min* | Vbatt* | Tempre* |
---|---|---|---|---|---|
1718715161 | 0 Pkt | 7 Pkt | 0 Pkt | 14 V | 34 DegC |
1718714561 | 0 Pkt | 5 Pkt | 0 Pkt | 13.98 V | 34.5 DegC |
1718713961 | 0 Pkt | 7 Pkt | 0 Pkt | 14 V | 33.5 DegC |
1718713361 | 0 Pkt | 5 Pkt | 0 Pkt | 14.02 V | 34 DegC |
1718712761 | 0 Pkt | 7 Pkt | 0 Pkt | 14 V | 34 DegC |
1718712161 | 0 Pkt | 5 Pkt | 0 Pkt | 14 V | 34 DegC |
1718711561 | 0 Pkt | 7 Pkt | 0 Pkt | 14 V | 34.5 DegC |
1718710961 | 0 Pkt | 5 Pkt | 0 Pkt | 14 V | 35 DegC |
1718710361 | 0 Pkt | 7 Pkt | 0 Pkt | 14 V | 34 DegC |
1718709761 | 0 Pkt | 5 Pkt | 0 Pkt | 14 V | 34.5 DegC |
1718709161 | 0 Pkt | 7 Pkt | 0 Pkt | 14 V | 34.5 DegC |
1718708561 | 0 Pkt | 11 Pkt | 0 Pkt | 14 V | 34 DegC |
1718707951 | 0 Pkt | 7 Pkt | 0 Pkt | 14 V | 34 DegC |
1718707351 | 0 Pkt | 5 Pkt | 0 Pkt | 13.98 V | 34 DegC |
1718706751 | 0 Pkt | 7 Pkt | 0 Pkt | 14 V | 33.5 DegC |
1718706151 | 0 Pkt | 5 Pkt | 0 Pkt | 14 V | 34 DegC |
1718705551 | 0 Pkt | 7 Pkt | 0 Pkt | 14 V | 34 DegC |
1718704951 | 0 Pkt | 5 Pkt | 0 Pkt | 14 V | 33.5 DegC |
1718704351 | 0 Pkt | 7 Pkt | 0 Pkt | 14 V | 34 DegC |
1718703751 | 0 Pkt | 5 Pkt | 0 Pkt | 14 V | 33.5 DegC |
1718703151 | 0 Pkt | 7 Pkt | 0 Pkt | 14 V | 33 DegC |
1718702551 | 0 Pkt | 5 Pkt | 0 Pkt | 14 V | 33 DegC |
1718701951 | 0 Pkt | 7 Pkt | 0 Pkt | 14 V | 32.5 DegC |
1718701351 | 0 Pkt | 5 Pkt | 0 Pkt | 14 V | 33 DegC |
1718700750 | 0 Pkt | 8 Pkt | 0 Pkt | 14 V | 32 DegC |
*Used Equation Coefficients:
Rx10min: 0, 1, 0
Tx10min: 0, 1, 0
Digi10min: 0, 1, 0
Vbatt: 0, 0.02, 10
Tempre: 0, 0.5, -50
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)