This is the latest recevied telemetry packets stored in our database for station/object DB8ZP-99. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1786734978 | 0 hPa | 39.4 C deg | 15.3 % | 0 hPa | 27.4 C deg |
| 1786733164 | 0 hPa | 40 C deg | 13.9 % | 0 hPa | 29.2 C deg |
| 1786727721 | 0 hPa | 40.7 C deg | 13.7 % | 0 hPa | 29.9 C deg |
| 1786725903 | 0 hPa | 40.5 C deg | 13.4 % | 0 hPa | 29.8 C deg |
| 1786724096 | 0 hPa | 40.7 C deg | 14 % | 0 hPa | 29.7 C deg |
| 1786720459 | 0 hPa | 40.5 C deg | 13.3 % | 0 hPa | 30.1 C deg |
| 1786716830 | 0 hPa | 40.2 C deg | 13.4 % | 0 hPa | 30.9 C deg |
| 1786713196 | 0 hPa | 39.9 C deg | 13 % | 0 hPa | 31.3 C deg |
| 1786709567 | 0 hPa | 39.5 C deg | 13.5 % | 0 hPa | 31 C deg |
| 1786707752 | 0 hPa | 39.1 C deg | 13.7 % | 0 hPa | 31 C deg |
| 1786705936 | 0 hPa | 38.6 C deg | 14.1 % | 0 hPa | 30.7 C deg |
| 1786704123 | 0 hPa | 38.1 C deg | 14.7 % | 0 hPa | 30.2 C deg |
| 1786700499 | 0 hPa | 37 C deg | 15.9 % | 0 hPa | 29.6 C deg |
| 1786689602 | 0 hPa | 33.8 C deg | 19.3 % | 0 hPa | 23.9 C deg |
| 1786684158 | 0 hPa | 32.9 C deg | 18.7 % | 0 hPa | 20.4 C deg |
| 1786680620 | 0 hPa | 33.6 C deg | 18.3 % | 0 hPa | 20.6 C deg |
| 1786678714 | 0 hPa | 34 C deg | 18.4 % | 0 hPa | 21.6 C deg |
| 1786673267 | 0 hPa | 34.5 C deg | 18.4 % | 0 hPa | 22.6 C deg |
| 1786660558 | 0 hPa | 36.5 C deg | 17.7 % | 0 hPa | 24.6 C deg |
| 1786656937 | 0 hPa | 36.8 C deg | 17.4 % | 0 hPa | 24.4 C deg |
| 1786655113 | 0 hPa | 37 C deg | 17.6 % | 0 hPa | 25.4 C deg |
| 1786651485 | 0 hPa | 37.6 C deg | 15.8 % | 0 hPa | 25.2 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)