This is the latest recevied telemetry packets stored in our database for station/object DC7OS-L4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp* | Humi* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1718710452 | 26.1 deg C | 62.5 % | 0 | 0 | 0 |
1718709550 | 26.2 deg C | 62.2 % | 0 | 0 | 0 |
1718708622 | 26.1 deg C | 62.3 % | 0 | 0 | 0 |
1718707722 | 25.8 deg C | 62.7 % | 0 | 0 | 0 |
1718706824 | 25.7 deg C | 62.8 % | 0 | 0 | 0 |
1718705929 | 25.6 deg C | 62.9 % | 0 | 0 | 0 |
1718705608 | 25.6 deg C | 63 % | 0 | 0 | 0 |
1718704705 | 25.5 deg C | 63.2 % | 0 | 0 | 0 |
1718703797 | 25.5 deg C | 63.4 % | 0 | 0 | 0 |
1718702900 | 25.4 deg C | 63.6 % | 0 | 0 | 0 |
1718701995 | 25.3 deg C | 63.8 % | 0 | 0 | 0 |
1718701099 | 25.2 deg C | 64.1 % | 0 | 0 | 0 |
1718700196 | 25.1 deg C | 64.2 % | 0 | 0 | 0 |
1718699295 | 25 deg C | 64.4 % | 0 | 0 | 0 |
1718698393 | 24.7 deg C | 65 % | 0 | 0 | 0 |
1718697493 | 24.7 deg C | 65.2 % | 0 | 0 | 0 |
1718696596 | 24.6 deg C | 65.4 % | 0 | 0 | 0 |
1718695692 | 24.4 deg C | 65.8 % | 0 | 0 | 0 |
1718694795 | 24.3 deg C | 66 % | 0 | 0 | 0 |
1718693896 | 24.1 deg C | 66.4 % | 0 | 0 | 0 |
1718693585 | 23.9 deg C | 66.9 % | 0 | 0 | 0 |
1718692681 | 23.7 deg C | 67.3 % | 0 | 0 | 0 |
1718690877 | 23.3 deg C | 68.3 % | 0 | 0 | 0 |
1718689981 | 23.2 deg C | 68.6 % | 0 | 0 | 0 |
1718689086 | 23.1 deg C | 68.8 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)