This is the latest recevied telemetry packets stored in our database for station/object N6QP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
---|---|---|---|---|---|
1719663403 | 12.45 Volt | 0 Pkt | 0 Pkt | 11 Pcnt | 0 None |
1719663103 | 12.45 Volt | 0 Pkt | 0 Pkt | 11 Pcnt | 0 None |
1719662803 | 12.45 Volt | 0 Pkt | 0 Pkt | 12 Pcnt | 0 None |
1719662503 | 12.45 Volt | 0 Pkt | 0 Pkt | 12 Pcnt | 0 None |
1719662203 | 12.45 Volt | 0 Pkt | 0 Pkt | 13 Pcnt | 0 None |
1719661903 | 12.45 Volt | 0 Pkt | 0 Pkt | 14 Pcnt | 0 None |
1719661603 | 12.45 Volt | 0 Pkt | 0 Pkt | 23 Pcnt | 0 None |
1719661303 | 12.45 Volt | 0 Pkt | 0 Pkt | 20 Pcnt | 0 None |
1719661003 | 12.45 Volt | 0 Pkt | 0 Pkt | 25 Pcnt | 0 None |
1719660703 | 12.45 Volt | 0 Pkt | 0 Pkt | 30 Pcnt | 0 None |
1719660403 | 12.45 Volt | 0 Pkt | 0 Pkt | 28 Pcnt | 0 None |
1719660103 | 12.38 Volt | 0 Pkt | 0 Pkt | 35 Pcnt | 0 None |
1719659803 | 12.38 Volt | 0 Pkt | 0 Pkt | 35 Pcnt | 0 None |
1719659504 | 12.38 Volt | 0 Pkt | 0 Pkt | 38 Pcnt | 0 None |
1719659204 | 12.38 Volt | 0 Pkt | 0 Pkt | 33 Pcnt | 0 None |
1719658904 | 12.38 Volt | 0 Pkt | 0 Pkt | 34 Pcnt | 0 None |
1719658604 | 12.38 Volt | 0 Pkt | 0 Pkt | 36 Pcnt | 0 None |
1719658304 | 12.38 Volt | 0 Pkt | 0 Pkt | 26 Pcnt | 0 None |
1719658004 | 12.38 Volt | 0 Pkt | 0 Pkt | 25 Pcnt | 0 None |
1719657704 | 12.38 Volt | 0 Pkt | 0 Pkt | 27 Pcnt | 0 None |
1719657404 | 12.38 Volt | 0 Pkt | 0 Pkt | 27 Pcnt | 0 None |
1719657104 | 12.38 Volt | 0 Pkt | 0 Pkt | 29 Pcnt | 0 None |
1719656804 | 12.3 Volt | 10 Pkt | 0 Pkt | 34 Pcnt | 0 None |
1719656504 | 12.3 Volt | 10 Pkt | 0 Pkt | 36 Pcnt | 0 None |
1719656204 | 12.23 Volt | 10 Pkt | 0 Pkt | 32 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)