This is the latest recevied telemetry packets stored in our database for station/object PU2LYJ-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1754227009 | 24 | 43 | 3 | 107 | 137 |
| 1754226084 | - | - | - | - | - |
| 1754225172 | 22 | 45 | 2 | 126 | 110 |
| 1754223324 | 21 | 48 | 2 | 103 | 138 |
| 1754220568 | 21 | 46 | 1 | 73 | 138 |
| 1754219659 | 20 | 49 | 1 | 64 | 138 |
| 1754218756 | 20 | 49 | 0 | 77 | 138 |
| 1754217846 | 20 | 48 | 0 | 73 | 138 |
| 1754216936 | 21 | 47 | 0 | 93 | 138 |
| 1754216020 | 20 | 49 | 0 | 79 | 138 |
| 1754215134 | 20 | 49 | 0 | 3 | 139 |
| 1754177999 | 27 | 33 | 13 | 63 | 138 |
| 1754177096 | 28 | 33 | 13 | 74 | 138 |
| 1754175272 | 28 | 32 | 12 | 51 | 138 |
| 1754174369 | 28 | 31 | 12 | 46 | 138 |
| 1754173460 | 29 | 30 | 12 | 64 | 138 |
| 1754172553 | 29 | 30 | 11 | 73 | 138 |
| 1754171656 | 29 | 29 | 11 | 67 | 138 |
| 1754170751 | 29 | 29 | 11 | 74 | 138 |
| 1754168940 | 30 | 29 | 10 | 56 | 138 |
| 1754168040 | 30 | 29 | 10 | 67 | 138 |
| 1754167133 | 30 | 29 | 10 | 51 | 136 |
| 1754166229 | 30 | 28 | 10 | 87 | 138 |
| 1754165310 | 30 | 27 | 9 | 133 | 136 |
| 1754164379 | 30 | 27 | 9 | 72 | 138 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)