APRS Track Direct

My position About ☰

reset

KB8ZXE-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KB8ZXE-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1732369892	0.17 Rx Erlang	0 Tx Erlang	171 count/10m	7 count/10m	0 count/10m
1732368692	0.15 Rx Erlang	0 Tx Erlang	157 count/10m	5 count/10m	0 count/10m
1732367492	0.17 Rx Erlang	0 Tx Erlang	156 count/10m	11 count/10m	0 count/10m
1732366292	0.16 Rx Erlang	0 Tx Erlang	163 count/10m	9 count/10m	0 count/10m
1732365092	0.15 Rx Erlang	0 Tx Erlang	155 count/10m	9 count/10m	0 count/10m
1732363892	0.15 Rx Erlang	0 Tx Erlang	143 count/10m	10 count/10m	0 count/10m
1732362692	0.12 Rx Erlang	0 Tx Erlang	123 count/10m	4 count/10m	0 count/10m
1732361492	0.13 Rx Erlang	0 Tx Erlang	133 count/10m	3 count/10m	0 count/10m
1732360292	0.14 Rx Erlang	0 Tx Erlang	141 count/10m	9 count/10m	0 count/10m
1732359092	0.16 Rx Erlang	0 Tx Erlang	161 count/10m	17 count/10m	0 count/10m
1732357892	0.16 Rx Erlang	0 Tx Erlang	169 count/10m	9 count/10m	0 count/10m
1732356692	0.15 Rx Erlang	0 Tx Erlang	143 count/10m	6 count/10m	0 count/10m
1732355492	0.16 Rx Erlang	0 Tx Erlang	166 count/10m	17 count/10m	0 count/10m
1732354292	0.13 Rx Erlang	0 Tx Erlang	137 count/10m	63 count/10m	0 count/10m
1732344692	0.14 Rx Erlang	0 Tx Erlang	145 count/10m	10 count/10m	0 count/10m
1732343492	0.13 Rx Erlang	0 Tx Erlang	126 count/10m	41 count/10m	0 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)