APRS Track Direct

My position About ☰

reset

OE3XIR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3XIR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	DecEf*	Temp*
1732273547	14.1 Volt	280 Pkt	67 Pcnt	63 Pcnt	14 C
1732273547	14.1 Volt	280 Pkt	67 Pcnt	63 Pcnt	14 C
1732273247	14.1 Volt	280 Pkt	68 Pcnt	63 Pcnt	14 C
1732272949	14.1 Volt	270 Pkt	68 Pcnt	63 Pcnt	14 C
1732272947	14.1 Volt	270 Pkt	68 Pcnt	63 Pcnt	14 C
1732272647	14.1 Volt	270 Pkt	67 Pcnt	63 Pcnt	14 C
1732272347	14.1 Volt	260 Pkt	67 Pcnt	63 Pcnt	14 C
1732272347	14.1 Volt	260 Pkt	67 Pcnt	63 Pcnt	14 C
1732272047	14.1 Volt	260 Pkt	69 Pcnt	63 Pcnt	14 C
1732271747	14.1 Volt	250 Pkt	69 Pcnt	63 Pcnt	14 C
1732271747	14.1 Volt	250 Pkt	69 Pcnt	63 Pcnt	14 C
1732271447	14.1 Volt	250 Pkt	70 Pcnt	63 Pcnt	14 C
1732271147	14.1 Volt	230 Pkt	68 Pcnt	63 Pcnt	14 C
1732271147	14.1 Volt	230 Pkt	68 Pcnt	63 Pcnt	14 C
1732270847	14.1 Volt	230 Pkt	68 Pcnt	63 Pcnt	14 C
1732270547	14.1 Volt	220 Pkt	67 Pcnt	63 Pcnt	14 C
1732270547	14.1 Volt	220 Pkt	67 Pcnt	63 Pcnt	14 C
1732270247	14.1 Volt	220 Pkt	68 Pcnt	63 Pcnt	14 C
1732269949	14.1 Volt	230 Pkt	67 Pcnt	63 Pcnt	14 C
1732269947	14.1 Volt	230 Pkt	67 Pcnt	63 Pcnt	14 C
1732269647	14.1 Volt	230 Pkt	65 Pcnt	63 Pcnt	14 C
1732269348	14.1 Volt	220 Pkt	63 Pcnt	63 Pcnt	14 C
1732269347	14.1 Volt	220 Pkt	63 Pcnt	63 Pcnt	14 C
1732269047	14.1 Volt	210 Pkt	63 Pcnt	63 Pcnt	14 C
1732268750	14.1 Volt	210 Pkt	62 Pcnt	63 Pcnt	13.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

DecEf: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)