This is the latest recevied telemetry packets stored in our database for station/object F4EIR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RF->INET* | INET->RF* | Repeater* | AllCount* | AllDrop* |
---|---|---|---|---|---|
1719424616 | 0 Pkts | 0 Pkts | 0 Pkts | 12 Pkts | 0 Pkts |
1719424016 | 0 Pkts | 0 Pkts | 0 Pkts | 15 Pkts | 0 Pkts |
1719423416 | 0 Pkts | 0 Pkts | 0 Pkts | 17 Pkts | 0 Pkts |
1719422816 | 0 Pkts | 0 Pkts | 0 Pkts | 20 Pkts | 0 Pkts |
1719422216 | 0 Pkts | 0 Pkts | 0 Pkts | 13 Pkts | 0 Pkts |
1719421616 | 0 Pkts | 0 Pkts | 0 Pkts | 15 Pkts | 0 Pkts |
1719421016 | 0 Pkts | 0 Pkts | 0 Pkts | 12 Pkts | 0 Pkts |
1719420416 | 0 Pkts | 0 Pkts | 0 Pkts | 18 Pkts | 0 Pkts |
1719419816 | 0 Pkts | 0 Pkts | 0 Pkts | 12 Pkts | 0 Pkts |
1719419216 | 0 Pkts | 0 Pkts | 0 Pkts | 8 Pkts | 0 Pkts |
1719418616 | 0 Pkts | 0 Pkts | 0 Pkts | 15 Pkts | 0 Pkts |
1719418016 | 0 Pkts | 0 Pkts | 0 Pkts | 12 Pkts | 0 Pkts |
1719417416 | 0 Pkts | 0 Pkts | 0 Pkts | 11 Pkts | 0 Pkts |
1719416816 | 0 Pkts | 0 Pkts | 0 Pkts | 17 Pkts | 0 Pkts |
1719416216 | 0 Pkts | 0 Pkts | 0 Pkts | 13 Pkts | 0 Pkts |
1719415616 | 0 Pkts | 0 Pkts | 0 Pkts | 10 Pkts | 0 Pkts |
1719415016 | 0 Pkts | 0 Pkts | 0 Pkts | 14 Pkts | 0 Pkts |
1719414416 | 0 Pkts | 0 Pkts | 0 Pkts | 20 Pkts | 0 Pkts |
1719413816 | 0 Pkts | 0 Pkts | 0 Pkts | 21 Pkts | 0 Pkts |
1719413216 | 0 Pkts | 0 Pkts | 0 Pkts | 17 Pkts | 0 Pkts |
1719412616 | 0 Pkts | 0 Pkts | 0 Pkts | 11 Pkts | 0 Pkts |
1719412016 | 0 Pkts | 0 Pkts | 0 Pkts | 9 Pkts | 0 Pkts |
1719411416 | 0 Pkts | 0 Pkts | 0 Pkts | 15 Pkts | 0 Pkts |
1719410816 | 0 Pkts | 0 Pkts | 0 Pkts | 13 Pkts | 0 Pkts |
1719410216 | 0 Pkts | 0 Pkts | 0 Pkts | 16 Pkts | 0 Pkts |
*Used Equation Coefficients:
RF->INET: 0, 1, 0
INET->RF: 0, 1, 0
Repeater: 0, 1, 0
AllCount: 0, 1, 0
AllDrop: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)