APRS Track Direct

My position About ☰

reset

MKSRDG Telemetry

This is the latest recevied telemetry packets stored in our database for station/object MKSRDG. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1758215182	14.18 Volt	950 Pkt	30 Pkt	92 Pcnt
1758215169	14.18 Volt	950 Pkt	30 Pkt	92 Pcnt
1758214270	14.18 Volt	990 Pkt	40 Pkt	92 Pcnt
1758213384	14.18 Volt	1010 Pkt	40 Pkt	92 Pcnt
1758213370	14.18 Volt	1010 Pkt	40 Pkt	92 Pcnt
1758212470	14.18 Volt	1020 Pkt	40 Pkt	91 Pcnt
1758211578	14.18 Volt	970 Pkt	40 Pkt	91 Pcnt
1758211570	14.18 Volt	970 Pkt	40 Pkt	91 Pcnt
1758210670	14.18 Volt	930 Pkt	40 Pkt	91 Pcnt
1758209775	14.18 Volt	940 Pkt	40 Pkt	91 Pcnt
1758209770	14.18 Volt	940 Pkt	40 Pkt	91 Pcnt
1758208870	14.18 Volt	830 Pkt	30 Pkt	92 Pcnt
1758207979	14.18 Volt	740 Pkt	20 Pkt	92 Pcnt
1758207970	14.18 Volt	740 Pkt	20 Pkt	92 Pcnt
1758207070	14.18 Volt	750 Pkt	20 Pkt	90 Pcnt
1758206183	14.18 Volt	730 Pkt	20 Pkt	91 Pcnt
1758206170	14.18 Volt	730 Pkt	20 Pkt	91 Pcnt
1758205270	14.18 Volt	820 Pkt	20 Pkt	91 Pcnt
1758204373	14.18 Volt	880 Pkt	20 Pkt	92 Pcnt
1758204370	14.18 Volt	880 Pkt	20 Pkt	92 Pcnt
1758203470	14.18 Volt	850 Pkt	20 Pkt	91 Pcnt
1758202582	14.18 Volt	840 Pkt	20 Pkt	92 Pcnt
1758202570	14.18 Volt	840 Pkt	20 Pkt	92 Pcnt
1758201670	14.18 Volt	840 Pkt	20 Pkt	92 Pcnt
1758200772	14.18 Volt	790 Pkt	20 Pkt	91 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)