This is the latest recevied telemetry packets stored in our database for station/object VE6WDM-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770170393 | 493 | 627 | 0 | 0 | 0 |
| 1770170364 | 491 | 626 | 0 | 0 | 0 |
| 1770170244 | 492 | 626 | 0 | 0 | 0 |
| 1770170115 | 491 | 627 | 0 | 0 | 0 |
| 1770169832 | 492 | 624 | 0 | 0 | 0 |
| 1770169710 | 492 | 623 | 0 | 0 | 0 |
| 1770169614 | 492 | 622 | 0 | 0 | 0 |
| 1770169574 | 492 | 621 | 0 | 0 | 0 |
| 1770169515 | 493 | 620 | 0 | 0 | 0 |
| 1770169443 | 492 | 620 | 0 | 0 | 0 |
| 1770169385 | 490 | 619 | 0 | 0 | 0 |
| 1770169204 | 492 | 615 | 0 | 0 | 0 |
| 1770169185 | 488 | 615 | 0 | 0 | 0 |
| 1770169053 | 492 | 612 | 0 | 0 | 0 |
| 1770168785 | 491 | 604 | 0 | 0 | 0 |
| 1770168716 | 488 | 601 | 0 | 0 | 0 |
| 1770168688 | 490 | 600 | 0 | 0 | 0 |
| 1770168646 | 491 | 598 | 0 | 0 | 0 |
| 1770168526 | 490 | 593 | 0 | 0 | 0 |
| 1770168485 | 490 | 591 | 0 | 0 | 0 |
| 1770168049 | 486 | 581 | 0 | 0 | 0 |
| 1770150286 | 495 | 591 | 0 | 0 | 0 |
| 1770150179 | 494 | 592 | 0 | 0 | 0 |
| 1770149781 | 494 | 585 | 0 | 0 | 0 |
| 1770149761 | 492 | 584 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)