APRS Track Direct

My position About ☰

reset

9W2ZJR-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W2ZJR-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1732466870	1 Pkt	0 Pkt	-47 dBm	0.02 V
1732465947	0 Pkt	0 Pkt	-47 dBm	0 V
1732465023	1 Pkt	0 Pkt	-46 dBm	0 V
1732464103	2 Pkt	0 Pkt	-52 dBm	0 V
1732463192	1 Pkt	0 Pkt	-52 dBm	0.02 V
1732462267	2 Pkt	0 Pkt	-53 dBm	0 V
1732461335	1 Pkt	0 Pkt	-52 dBm	0 V
1732460514	3 Pkt	0 Pkt	-52 dBm	0 V
1732459605	0 Pkt	0 Pkt	-52 dBm	0 V
1732457762	0 Pkt	0 Pkt	-54 dBm	0 V
1732457011	1 Pkt	0 Pkt	-53 dBm	0 V
1732456089	1 Pkt	2 Pkt	-52 dBm	0 V
1732454004	0 Pkt	0 Pkt	-52 dBm	0 V
1732453236	0 Pkt	0 Pkt	-53 dBm	0 V
1732452314	2 Pkt	0 Pkt	-52 dBm	0 V
1732451392	1 Pkt	0 Pkt	-53 dBm	0 V
1732450469	1 Pkt	0 Pkt	-52 dBm	0 V
1732449547	0 Pkt	0 Pkt	-52 dBm	0 V
1732448813	0 Pkt	0 Pkt	-54 dBm	0 V
1732447891	0 Pkt	0 Pkt	-54 dBm	0 V
1732447483	0 Pkt	0 Pkt	-53 dBm	0 V
1732447027	0 Pkt	0 Pkt	-53 dBm	0 V
1732446103	0 Pkt	0 Pkt	-52 dBm	0 V
1732445557	0 Pkt	0 Pkt	-53 dBm	0 V
1732444635	1 Pkt	0 Pkt	-54 dBm	0 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)