APRS Track Direct

My position About ☰

reset

UR7D-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object UR7D-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1732293742	13.73 Volt	170 Pkt	100 Pkt	74 Pcnt
1732293442	13.65 Volt	160 Pkt	90 Pkt	73 Pcnt
1732293141	13.73 Volt	160 Pkt	90 Pkt	74 Pcnt
1732292841	13.58 Volt	160 Pkt	100 Pkt	76 Pcnt
1732292541	13.73 Volt	160 Pkt	100 Pkt	79 Pcnt
1732292241	13.58 Volt	170 Pkt	110 Pkt	83 Pcnt
1732291940	13.73 Volt	180 Pkt	110 Pkt	87 Pcnt
1732291640	13.73 Volt	170 Pkt	110 Pkt	86 Pcnt
1732291340	13.73 Volt	190 Pkt	120 Pkt	88 Pcnt
1732291039	13.65 Volt	190 Pkt	120 Pkt	87 Pcnt
1732290739	13.73 Volt	190 Pkt	120 Pkt	86 Pcnt
1732290439	13.73 Volt	200 Pkt	130 Pkt	87 Pcnt
1732290138	13.73 Volt	210 Pkt	130 Pkt	91 Pcnt
1732289838	13.65 Volt	220 Pkt	130 Pkt	91 Pcnt
1732289538	13.73 Volt	220 Pkt	130 Pkt	89 Pcnt
1732289238	13.65 Volt	220 Pkt	140 Pkt	90 Pcnt
1732288937	13.73 Volt	220 Pkt	140 Pkt	88 Pcnt
1732288637	13.65 Volt	220 Pkt	130 Pkt	87 Pcnt
1732288337	13.73 Volt	220 Pkt	130 Pkt	86 Pcnt
1732288036	13.73 Volt	220 Pkt	130 Pkt	87 Pcnt
1732287436	13.65 Volt	200 Pkt	120 Pkt	87 Pcnt
1732287136	13.73 Volt	200 Pkt	120 Pkt	87 Pcnt
1732286835	13.65 Volt	190 Pkt	120 Pkt	88 Pcnt
1732286535	13.73 Volt	190 Pkt	120 Pkt	89 Pcnt
1732286235	13.65 Volt	180 Pkt	120 Pkt	89 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)